My Xbox360 Is Silent ? Options

[aboalsos]

hey all ..

plz anyone can help

my xbox360 is silent

i was lost my dvdkey , and i read my nand.bin
and when i write the xell to get my cpu key
is everything stop , there is no light with my 360

and cannot write the nand.bin

Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller
Fatal Error

[craz3d]

i was lost my dvdkey , and i read my nand.bin
and when i write the xell to get my cpu key
is everything stop , there is no light with my 360

and cannot write the nand.bin

Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller
Fatal Error

Obviously, some time between reading your original NAND contents to nand.bin and trying to write the hacked image containing Xell, you screwed up the wiring for the LPT dumper. Double check the wiring and solder joints for the 7 wires you used for the LPT hack. If you don't have a diode, put one on. Likewise double check you used all the correct resistors. Your 360 must be plugged into the power adapter, but not turned on. Double check that the DB25 connector is plugged firmly into the computer and that all of the pins still have the correct wires solder to them and that you have no solder bridges.

This post has been edited by craz3d: Jan 19 2010, 12:11 AM

[aboalsos]

craz3d , thnx for replay

is tow console stop with xell

after write the xell everything stop with my 360 , and i have tow console stop

my cebal is good and it reading the nand verywell but my problem with xell.bin

now the tow 360 stoooop

and i hope anyone can help me

please guys i am sick for tow day bcz that

thnx..

[Downcastnut]

craz3d , thnx for reply

this is the second console to stop working after writing xell to the nand

after writing xell everything stopping working with my 360 , and i now have two consoles that stopped working

my ??cebal?? is good and it reading the nand very well but my problem is with xell.bin

now two of my 360s stooooppppppeeeeddd

and i hope someone can help me

please guys i am sick for two day because of this

thnx..

fixd.

as for the problem. is your console exploitable? did you solder your jtag wires? have you checked what CB version you have?

[aboalsos]

Downcastnut , thnx for reply

yes i solder jtag wires , is everything good i read the nand ..

but i write the xell.bin to get the cpu key there the 360 is stop

know i found why it stop , because i write xenone xell on my bord but my bord is falcon

now it did not get power and i get :

Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller
Fatal Error

there is any ways to put the bord power to find the LPT port???

[Downcastnut]

if you cant get the pc to find the flash controller search "shorting the nand"

maybe that will make the 360 seen on your pc. It happens after a bad flash i think. or something about the spi controller.

just try that.

[aboalsos]

if you cant get the pc to find the flash controller search "shorting the nand"
__________________

what u mean "shorting the nand"

i don't understand ??

[Downcastnut]

look it up with the search function here on the forums.

[thejipster]

If you are not seeing the controller
Check
1. Power supply, make sure it is plugged in.
2. Check to make sure your solder joints are still solid
3. Check to make sure there isn't a short anywhere. Use a multimeter and the continuity feature to see if there is a short
4. Check the connections on the other end connected to the PC parallel port. Make sure non of the pins are shorted.

The ground point is typically the hardest point to solder, so make sure that is still solid on the mobo.

[ABC-King]

follow This thats exactly what i did and it worked perfectly

[shtewps]

hey all ..

plz anyone can help

my xbox360 is silent

i was lost my dvdkey , and i read my nand.bin
and when i write the xell to get my cpu key
is everything stop , there is no light with my 360

and cannot write the nand.bin

Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller
Fatal Error

Does this look like a forum that speaks anything but English?

fixd.

as for the problem. is your console exploitable? did you solder your jtag wires? have you checked what CB version you have?

Seriously why bother helping these people. It's a waste of time, they cannot understand you at all.

I know your trying to be nice, but this is an English forum, I understand he is making an attempt to translate to our language. That what it is tho, an attempt, resulting in an inevitable failure. I really think we should just pass over these posts, completely disregard them.

Were not helping by letting them post translated (poorly) text in our English forum. Am I alone here or what?

[jakl53]

Does this look like a forum that speaks anything but English?
Seriously why bother helping these people. It's a waste of time, they cannot understand you at all.

I know your trying to be nice, but this is an English forum, I understand he is making an attempt to translate to our language. That what it is tho, an attempt, resulting in an inevitable failure. I really think we should just pass over these posts, completely disregard them.

Were not helping by letting them post translated (poorly) text in our English forum. Am I alone here or what?

EDIT: WOW didnt mean to bring this thread back to life.

This post has been edited by jakl53: Aug 16 2010, 03:15 AM