I just swapped my case from a normal stock black one to the clear XCM case, and now all my X3 mod does is boot to the stock Xbox BIOS. Does not boot the EvoX BIOS I flashed on it. All of my solder joints are nice and tight, and everythings hooked up according to the instructions, and I've tried wiggling it and pushing down on it, and its firmly seated on the bridge.
But nothing happens.
I lost the little external switch, so I dont know whats going on.
Lightly tapping, holding the button in, and holding both eject and power all load up the stock MS BIOS. Is the chip dead? If so, is there anyway to do the TSOP flash or softmod even though my HDD isnt locked and I dont have the stock one anymore, or am I screwed.