xeBuild GUI v1.0 Options

[Xbox-Scene]

xeBuild GUI v1.0 Posted by XanTium | December 9 22:04 EST | News Category: Xbox360

Swizzy released a GUI for xeBuild v1.0: [QUOTE] Overview - What it does - This is a frontend/GUI for xeBuild, what it does is make it easy for you to select most options that you might need, such as Motherboard, SMC hack for freeboot, image type etc. etc. - It is able to check what SMC hack you have previously used for JTAG it's also able to tell you what SMC version you have, and if it's a JTAG, Clean/Retail, Glitch or Cygnos patched SMC :) - If you put any of these files next to the executable it'll use them automaticly: SMC.bin - Custom SMC of your choice; ONLY USE THIS OF YOU KNOW WHAT YOU ARE DOING!!!! Xell.bin - Custom Xell of your choice; ONLY USE THIS OF YOU KNOW WHAT YOU ARE DOING!!!! cpukey.txt - It'll read the first line of this file as CPUKey flashdmp.bin - It'll load this as source nand ;) Default.xml - It'll load any preset settings from this file ;) options.ini - It'll load any custom settings from this (for xeBuild) launch.ini - Settings for Dashlaunch, if you choose to use this setting it'll include this file in the built image ;) [/QUOTE] Official Site: n/a, by Swizzy Download: n/a (might be illegal under DMCA/EUCD) News-Source: logic-sunrise.com / xbins.org

[krizalid]

anyone knows if this GUI comes with the Hotfix on xeBuild v1.00?

EDIT: Just found updated to v1.0b which has the Hotfix

This post has been edited by krizalid: Dec 10 2011, 08:02 AM

[omf]

small bug found, when using this with the cygnos360 option ticked you receive an error telling you that the smc file cannot be copied, so you will have to copy the file each time you build an image from the smc directory into the data directory and rename it to smc.bin

if you dont do this it will remove the smc.bin from the source nand image which is not patched for the cygnos because it is the original one for retail boxes

consider fan speed setting options for future releases too

[Spooning]

I love it.Thank YOU very much! Keep it up

[soulwarrior]

consider fan speed setting options for future releases too

It has fan speed setting options. You have to check off use custom settings.

[omf]

It has fan speed setting options. You have to check off use custom settings.

ok i will check that out.

to clarify what i was saying before:

==================================
Swizzy's xeBuild GUI version 1.0b
Log Started: Saturday 10/12/2011 11:02:32
==================================
Using: xellreloaded for JTAG hack
Copying Cygnos v2 patched SMC... FAILED!
ERROR: Could not copy Cygnos v2 SMC! defaulting to current!
Including dashlaunch... Done!
Including custom dashlaunch settings (launch.ini)... Done!
Copying nand to data Main.dir, this may take a while... Done!

[Swizzy]

ok i will check that out.

to clarify what i was saying before:

==================================
Swizzy's xeBuild GUI version 1.0b
Log Started: Saturday 10/12/2011 11:02:32
==================================
Using: xellreloaded for JTAG hack
Copying Cygnos v2 patched SMC... FAILED!
ERROR: Could not copy Cygnos v2 SMC! defaulting to current!
Including dashlaunch... Done!
Including custom dashlaunch settings (launch.ini)... Done!
Copying nand to data Main.dir, this may take a while... Done!

Thank you for the bugreport, i'm guessing you used a jasper? that's the only one i can see in the code would fail as it tried to copy the motherboardname.bin meaning if you choose xenon it takes: xenon.bin and for jasper it would take: jasper16.bin or so, which don't exist, it's fixed now tho in the upcomming version, changing a couple of other things while's i'm at it and also adding in a update downloader since alot of ppl seems to have had a problem with how to get avatar support back

[omf]

Thank you for the bugreport, i'm guessing you used a jasper? that's the only one i can see in the code would fail as it tried to copy the motherboardname.bin meaning if you choose xenon it takes: xenon.bin and for jasper it would take: jasper16.bin or so, which don't exist, it's fixed now tho in the upcomming version, changing a couple of other things while's i'm at it and also adding in a update downloader since alot of ppl seems to have had a problem with how to get avatar support back

i actually have multiple xbox 360's just so happens that the first one i tried was a jasper 256 which would be jasper256.bin which worked when i renamed the jasper smc to that.

it seems that there's a problem with the custom options saving too, it just generates an error



This post has been edited by omf: Dec 11 2011, 05:55 PM

[Swizzy]

i actually have multiple xbox 360's just so happens that the first one i tried was a jasper 256 which would be jasper256.bin which worked when i renamed the jasper smc to that.

it seems that there's a problem with the custom options saving too, it just generates an error

Ok, could you give me a screenshot of the error so that i can find the problem?

[GARRYB]

isnt there any option where i just add my nand and it automatically tells me which board i have like xenon etc and it automatically patches my and to latesat version so i just have to pass that on my usb and thats it.