Liteon 0401 Flashing Frozed During Writing Options

[gameworld]

Using usb pro and it frozed in the middle of writting.
now usbpro wont regonized drive in jungle flasher.

Here is the log:





~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Fri Aug 03 14:46:44 2012



This is a 32 bit process running on 2 x 32 bit CPUs

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 7 I/O Ports.

Found 1 Com Ports.

Found 3 windows drives C: D: E:

Found 1 CD/DVD drives D:



Sending Vendor Intro to port 0x0000

Status 0x51

Re-sending Vendor Intro:

.......

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x8C

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name: Winbond/NEX(W25P20/NX25P20)

Flash Size: 262144 bytes

Loading firmware file C:\Documents and Settings\winxp\Desktop\Dummy.bin

MD5 hash: 1919593c14e76dc1166d7297a1e5ebfa

Inquiry string found

Identify string found

Drive key @ 0xA030 165574AD6F5ADD19FE9CB44E81E658D8

Firmware Osig: [PLDS DG-16D4S 0401]

Firmware is: SlimKey Extract

Loading firmware file C:\Documents and Settings\winxp\Desktop\JungleFlasher.0.1.92.Beta(304)\JungleFlasher v0.1.92 Beta (304)\firmware\Dummy.bin

MD5 hash: 1919593c14e76dc1166d7297a1e5ebfa

Inquiry string found

Identify string found

Drive key @ 0xA030 165574AD6F5ADD19FE9CB44E81E658D8

Firmware Osig: [PLDS DG-16D4S 0401]

Firmware is: SlimKey Extract

Auto-Loading firmware file C:\Documents and Settings\winxp\Desktop\JungleFlasher.0.1.92.Beta(304)\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0401-v3.0.bin

MD5 hash: 87fba52607d01d3c73722f9f818588c9

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D4S 0401]

Firmware is: LT-Plus 3.0

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target





Target f/w saved as: hacked.bin



Sending Spi UnLock request to Port 0x0000

.

Spi Status: 0x00



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Writing target buffer to flash

Writing Bank 0: .

Getting Status from port 0x0000

XECUTER X360USB PRO removed.

reboot and unplug usbpro. and jungle flasher regonized it.

try to write it again select phat ( that what junglflasher said to do)
and it just sit there:

Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Writing target buffer to flash
Writing Bank 0: .

[dougiegillam]

Have you tried plugging the usbpro into a different usb socket, also you need to follow the jungleflasher guide V1.4.4 and treat the retail unlocked pcb as a TX board i.e page 211-218.