xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Closed TopicStart new topic
> Whats The Eastest Way To Open A Xbox 360?
m3nd0za23
post Jul 8 2009, 09:43 PM
Post #1


X-S Member
*

Group: Members
Posts: 69
Joined: 7-July 09
Member No.: 414865
I flashed my Hitachi 59 already, but can't put the top cover of the 360 back on, lmfao. I opened that 360 with some mini screw driver and ripping the top off. I'm wondering whats a better method where I don't need to buy the opening kit.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
run187
post Jul 8 2009, 10:21 PM
Post #2


X-S X-perience
**

Group: Members
Posts: 331
Joined: 5-November 08
From: england
Member No.: 394571
Xbox Version: none
360 version: v4.0 (jasper)
the opening kits about 2 pound off ebay and wont fuck your case up like ripping the top off will
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
mohamdawg
post Jul 8 2009, 10:21 PM
Post #3


X-S Enthusiast


Group: Members
Posts: 4
Joined: 4-May 09
Member No.: 411077
You just need something that will fit through the 360's vent holes and something flat that will fit in the holes in the back. For the screws, if you don't use a Torx screwdriver and opt for anything else, there is a VERY high chance that you'll strip it, so just go to a hardware store (or you might even try your luck at a pawn shop) and buy a cheap toolbox with the size that the xbox 360 uses ( i forgot the exact number laugh.gif)
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
run187
post Jul 8 2009, 10:28 PM
Post #4


X-S X-perience
**

Group: Members
Posts: 331
Joined: 5-November 08
From: england
Member No.: 394571
Xbox Version: none
360 version: v4.0 (jasper)
t10 and t 8 for the small one that dont need to come off or just pay there 3 pounds for the kit i linked which i knwo works beacuse i own one saves arsing around with mini screw drivers
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
m3nd0za23
post Jul 8 2009, 11:22 PM
Post #5


X-S Member
*

Group: Members
Posts: 69
Joined: 7-July 09
Member No.: 414865
QUOTE(run187 @ Jul 8 2009, 04:28 PM) *

t10 and t 8 for the small one that dont need to come off or just pay there 3 pounds for the kit i linked which i knwo works beacuse i own one saves arsing around with mini screw drivers


Alright, Thanks for the info. I'm going to try t10 and t8. I'm a little be sleezy o ordering stuff online, so ill back out on that. Here the kit goes for 14.95 CAN.

QUOTE(mohamdawg @ Jul 8 2009, 04:21 PM) *

You just need something that will fit through the 360's vent holes and something flat that will fit in the holes in the back. For the screws, if you don't use a Torx screwdriver and opt for anything else, there is a VERY high chance that you'll strip it, so just go to a hardware store (or you might even try your luck at a pawn shop) and buy a cheap toolbox with the size that the xbox 360 uses ( i forgot the exact number laugh.gif)


Alright, thanks. I'm going to look for some tools in my tool shed instead of going to the pawn. I'm feelin lazy.

QUOTE(run187 @ Jul 8 2009, 04:21 PM) *

the opening kits about 2 pound off ebay and wont fuck your case up like ripping the top off will


I'm just gonna use some of my tools. Hopefully I don't screw up taking it apart lmfao.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Closed TopicStart new topic

 

Lo-Fi Version Time is now: 22nd May 2013 - 10:37 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx