[help] My Tray Stay Open :( Please Really Help Me Options

[jackvolp]

HEllo guys,

i flashed a liteon with LT2.0 . During the operation i got several error and freezing with JF, but at the end i wrote the new firmware!

I only get a problem . The center green led is always lighting and my tray stays open. When power off the console the tray close, and after re-open. If i close the tray it reopens

Can you help me please ?

i put my log so you can read anything :

CODE

JungleFlasher 0.1.90 Beta (293)

Session Started Thu Dec 08 20:51:28 2011



This is a 32 bit process running on 4 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 4 I/O Ports.

Found 1 Com Ports.

Found 5 windows drives A: C: D: G: H:

Found 1 CD/DVD drives G:



Loading firmware file C:\Users\Pisolo\Desktop\x360\Lite_CFW.bin

MD5 hash:  544a207817f6bfa0643ece8a90a91b34

Drive key @ n/a ############MY_KEY###################

Firmware Osig: [PLDS    DG-16D2S        0251]

Firmware is:  LT-Plus 2.0                    



Sending Lite-On-Erase request to port 0x8880

..............

Drive returned Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name:  Unknown type

Flash Size:  n/a

Unknown flash type Write aborted !

Sending Vendor Intro to port 0x8880



Serial flash found with Status 0x72



Sending Device ID request to port 0x8880

Spi Status: 0x00

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name:  MXIC(MX25L2005)

Flash Size:  262144 bytes



Getting Status from port 0x8880

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x8880

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !

[CLaeR]

You should try reflash drive again, if it'll not help try another drive. there can be a lot of problems(wrong flash, fried drive, fried south bridge etc)