|
  |
 Ndure Installer For Pc, ndure-complete |
|
|
| tonylu |
 Dec 22 2005, 09:35 AM
|
X-S Enthusiast
Group: Members
Posts: 10
Joined: 11-December 05
Member No.: 262940
|
I first used Textbook's method to softmod my xbox, later I added a 200gb HD. Then used xboxHD to build the HD as orignal one (I can use it to boot MS dash). So I moded the 200gb HD again using Textbook's method. Then I wanted to update to Unleash using Ndure 2.1, but I found I can't write to C: while doing anything on other drives. Later I used xboxHD to "Build a new xbox HD from scrath", but I still couldn't copy any files into C:. So now I'm running Unleash with files on E:, I can't boot to MS dash. Any suggestions? Do I need to wipe fatx table before building a new HD? Btw, Ndure is great, much more function then Evox.
|
|
|
|
| |
| ArjanDotOrg |
Dec 22 2005, 02:50 PM
|
X-S Enthusiast
Group: Members
Posts: 14
Joined: 4-September 05
Member No.: 244497
|
Tonight I have to build a 250GB in an xbox.
Can I just use Ndure .6? Or do I have to use Ndure .67?
And does XboxHDM support G-drives?
Or can I just use XboxHDM to prepare the disk with a really big F:-drive?
Thanks,
Arjan
|
|
|
|
| |
| tonylu |
Dec 22 2005, 05:18 PM
|
X-S Enthusiast
Group: Members
Posts: 10
Joined: 11-December 05
Member No.: 262940
|
QUOTE(kingroach @ Dec 22 2005, 10:46 AM) 
so now you have ndure installed, you can boot to unleashx just cannt boot to MS dash right?..
Hi kingroach, now I can boot to MS from Eject button and access to my C:  . But when I look network settings, it boots to ndure automatically. When I cold-boot to ndure, C: is empty if I use FTP browser and I can't write it. But if I launch ndure toolset, I can access my C: again like booting to MS dash. I have no idea about it. |
|
|
|
| |
| Ndure protagonist |
Dec 22 2005, 06:52 PM
|
X-S Expert
Group: Members
Posts: 544
Joined: 30-July 05
Member No.: 237656
Xbox Version: v1.0
360 version: none
|
QUOTE(LafferUSA @ Dec 21 2005, 02:13 PM)
Snap, my Top Spin/NCAA 2005 mulitgame disk doesn't work.
The fonts.du problem is still there.
Is this problem fixed yet?
The Fonts folder and its XTF's remain in place when fonts.du is created (and are still found by all XBE's that need them). What exactly happens when that disc is coldbooted, with both the generic and the kernel specific font? (The font can be toggled via the Ndure Toolset and makes a difference if xboxdash.xbe gets re-invoked, such as occurs after acknowledging a dashupdate.xbe failure message...) This post has been edited by Ndure protagonist: Dec 22 2005, 07:11 PM |
|
|
|
| |
| tonylu |
Dec 22 2005, 07:59 PM
|
X-S Enthusiast
Group: Members
Posts: 10
Joined: 11-December 05
Member No.: 262940
|
QUOTE(kingroach @ Dec 22 2005, 12:09 PM)
you cannt go to xbox live network settings with Ndure.. Thats why its recommended to setup the network first and install ndure ( or any other exploit).. The empty C you C is shadowc.. its for to protect your actual C drive but when Ndure toolset boots, it disables shadowc..
I see, thanks a lot! But why the C: is empty when I coldboot to ndure and I can't copy files into it. The same thing happed after I softmoded the HD with xboxhdm (evox). I couldn't copy the ndure generated C: to xbox C:. My c: seems to be locked for writing. This post has been edited by tonylu: Dec 22 2005, 08:02 PM |
|
|
|
| |
| tonylu |
Dec 23 2005, 04:21 AM
|
X-S Enthusiast
Group: Members
Posts: 10
Joined: 11-December 05
Member No.: 262940
|
QUOTE(kingroach @ Dec 22 2005, 02:52 PM)
Thats something weired.. when you see empty C ( means shadowc enabled).. go to unleashx format option and format "C' and then try writing files to shadowc again..
I tried to format the empty C, but I couldn't. Btw, the shadowc folder should be in C:, right? I also found I somehow didn't put the settings_adoc.xip file into "xboxdashdata.185ead00", that's why I can't see network settings i guess. I tried to just copy my backup settings_adoc.xip to C:, the copied file only shows 0kb. |
|
|
|
| |
| tonylu |
Dec 23 2005, 11:32 PM
|
X-S Enthusiast
Group: Members
Posts: 10
Joined: 11-December 05
Member No.: 262940
|
QUOTE(tonylu @ Dec 22 2005, 10:28 PM)
I tried to format the empty C, but I couldn't. Btw, the shadowc folder should be in C:, right? I also found I somehow didn't put the settings_adoc.xip file into "xboxdashdata.185ead00", that's why I can't see network settings i guess. I tried to just copy my backup settings_adoc.xip to C:, the copied file only shows 0kb.
I also tried to use xbrowser in xboxhdm to copy "settings_adoc.xip" to my xbox c, but not enough space on C (only 335mb), which is wired, since ndure files are about 497MB, how can I copy all the files into xbox C? |
|
|
|
| |
| perplx |
Dec 25 2005, 02:12 AM
|
X-S Enthusiast
Group: Members
Posts: 1
Joined: 14-March 05
Member No.: 206173
|
QUOTE(tonylu @ Dec 22 2005, 11:25 AM) Hi kingroach, now I can boot to MS from Eject button and access to my C: . But when I look network settings, it boots to ndure automatically. When I cold-boot to ndure, C: is empty if I use FTP browser and I can't write it. But if I launch ndure toolset, I can access my C: again like booting to MS dash. I have no idea about it. I have had this problem too, I think its a problem with xboxhdm. I was able to fix it by running ndure toolset to see the real C. Then I deleted all files on C and FTP'd ndure over. Then I was able to write to virtual C. So start fresh over ftp. |
|
|
|
| |
| tonylu |
Dec 28 2005, 01:04 AM
|
X-S Enthusiast
Group: Members
Posts: 10
Joined: 11-December 05
Member No.: 262940
|
QUOTE(perplx @ Dec 24 2005, 08:19 PM)
I have had this problem too, I think its a problem with xboxhdm. I was able to fix it by running ndure toolset to see the real C. Then I deleted all files on C and FTP'd ndure over. Then I was able to write to virtual C.
So start fresh over ftp.
I've already done that several times, but each time my xbox refused to boot. Thanks anyway. |
|
|
|
| |
| Takenover83 |
Dec 29 2005, 04:57 AM
|
X-S Member
Group: XS-BANNED
Posts: 137
Joined: 2-May 03
From: Indianapolis, IN USA
Member No.: 35770
Xbox Version: unk
360 version: v1 (xenon)
|
K Im kinda worried so can someone tell me if my setup is Live ok? I first created a folder(ndure), and copied my retail C drive into the folder like instructed. Ran ndure 3.0 with the following options CODE Basic Files
Retail Files
Add Shadow C
Nkpatcher Options (Use Nkpatcher .67)
Kernel Specific Fonts (5838)
Add Ndure Toolset. After that I uploaded everything and took some caution with the 2 files that needed to uploaded individually. Everything appears to run ok(unleashx) but shadowc was empty. Hmm so I thought I would test something before populating shadowc with a clean dash. So I tried to boot into retail mode(booted with eject) and to my surprise, I got the retail dash? How, isnt this called from shadowc which was currently empty. I hope it wasnt loading the dash with all the exploited files....Any who I will stay away from Xbox Live till I find out. I loaded up Unleashx and populated the shadowc with a clean retail dash. Is this all normal? Should I be worried? |
|
|
|
| |
|
|
|
