Joined: 18-January 05
Member No.: 189378
Here goes. Got a 1.6v xbox. Buddies 4 year old found his way into the main settings and messed up the video modes and set it to pal. Went back in and set it back to ntsc. Booted system. No picture at all but had audio. Took PaulY and someone elses advice on how to flash an eeprom. Using an XChip by the way. Wow, picture came up. Rebooted system and now no picture or audio now. Since the eeprom was from a different version xbox, I got another xbox 1.6 but not sure if they are both a's or b's or mixed. Still the same problem. Tried restoring eeprom and nothing.
I used the method of getting eeprom using slayer's, ftp and inject into the proper bios need.
Joined: 20-June 04
Member No.: 126296
a or b shoudl not matter.
Boot the xchip in working 1.6 and do a eeprom backup in evox.
Now connect xchip to the non working 1, with programmed hooked up and hold teh black button on programmer for 5 seconds after pressing power. This will copy over the epprom you backed up. Wait about 30 seconds and you may need to power off/on xbox and should get video back..