Group: Members
Posts: 3
Joined: 15-February 11
Member No.: 450632
Hello everyone.
I have a xbox with a xbit chip and I just bought one from a friend (v 1.4). I would like to know what is the best tutorial for flashing the tsop without using any hot swap technique but using the xbit chip. (For what I read if I try to flash with the chip it will try to flash the chip, not the tsop and I can't deactivate the chip after booting with it...)
Group: Members
Posts: 5749
Joined: 27-August 08
From: UK
Member No.: 388964
Xbox Version: v1.4
360 version: v4.0 (jasper)
You want to flash the TSOP on the 1.4?
In that case, get hold of an exploitable game and a memory card. Solder the TSOP points on the 1.4. FTP one of the Raincoat gamesaves to the chipped Xbox, copy it to the memory card, then onto the 1.4 Xbox. Run the game, load the gamesave, follow the instructions to flash the TSOP.
Alternatively, instead of using a Raincoat gamesave use a Krayzie 1.1.1 softmod gamesave. Softmod the Xbox, install Evox dash as an application, then use that to flash the TSOP.
Group: Members
Posts: 3
Joined: 15-February 11
Member No.: 450632
thanks heimdall for your answer.
Can I use this technique described by Lordvader129
QUOTE
get kingroaches ndure installer, it will generate files to FTP to your C drive, then disable the chip and boot a slayers cd and flash, afterward youll have to restore a stock C drive, which can be done from the slayers CD
Group: Members
Posts: 3
Joined: 15-February 11
Member No.: 450632
Yes. that's the idea. In fact I already installed the chip in the 1.4 xbox. So I simply ftp the files generated by ndure, remove the chip and then I will have a softmod xbox that can run slayers CD to flash the tsop right?