Group: Members
Posts: 2149
Joined: 7-December 04
Member No.: 174113
Xbox Version: v1.0
with a softmodded box you can do anything a box with a chip can do except change the boot screen and boot up from an unlocked hard drive.....so that's a yes on the xbmc and evox...you can't flash the bios though, softmods only affect things in memory
Group: Dev/Contributor
Posts: 3919
Joined: 8-July 04
Member No.: 129500
Xbox Version: unk
360 version: none
When working with anyones xbox, i use cdrw disks, then the first burn I just burn the exploit, then after I successfully get thier eeprom.bin. I update the eeprom folder with the eeprom.bin and recreate the iso, and finalize the burn onto a cdr disk.
This post has been edited by DaddyJ: Jan 27 2005, 08:51 PM
Group: Members
Posts: 24
Joined: 28-April 03
Member No.: 34993
I had 2 eeprom.bin one in Backup\backup folder with: bios.bin, disk.bin, eeprom.bin, hddinfo.tex, hddkey.bin. another in backup_linux folder with: C.md5sum, C.tar.gz, eeprom.bin, hdd_info.tex, xbox_info.tex.
these two eeprom.bin have 1KB each, I don't know if the file writing are the same. which eeprom.bin should I update to the eeprom folder? it it the only eeprom.bin that I put in there?
Group: Dev/Contributor
Posts: 3919
Joined: 8-July 04
Member No.: 129500
Xbox Version: unk
360 version: none
They both should be the same, but to be safe, load up evox as a application, and run the backup function in settings, this will back a BACKUP folder in the same directory as the evox.xbe file, and inside of there will be an eeprom.bin, use this one, as it is for sure the correct one.
Group: Members
Posts: 250
Joined: 18-October 04
Member No.: 157723
Tried your info DaddyJ on hotswapping just as a test. I made an XBHDM Recovery CD with no eeprom and put stock files on C, the on E put exploits, roms, apps, etc. even put a folder called PC Apps so I can ftp up to a pc after exploit. Tried your tutorial, worked first time. Ran exploit, bam, shadowC, and all apps were there when done.
Group: Members
Posts: 15
Joined: 8-September 04
Member No.: 145513
Hey there. I've been reading all sorts of tutorials for the past few weeks. Printed out a bunch as well. I only have a couple question remaining...
I plan on following this tutorial to a T. Was gonna change booting locations, but since this is my first xbox mod, I figured I'd play it safe and use the UXE complete package stock. This concerns the swapping time. I've read a couple tutorials that said you can swap while the xbox is sitting at the M$ dash, and the comp is sitting at the first xboxhdm menu. Is this true? And does the swap itself need to be done quickly? Perhaps some sort of signal need to remain mostly unbroken?
Group: Dev/Contributor
Posts: 3919
Joined: 8-July 04
Member No.: 129500
Xbox Version: unk
360 version: none
The hard drive should be unlocked at the m$ dash, but the actual swap should be done fairly quick, I havent ever tested leaving the IDE ribbon off the HD in an unlocked state.
Group: Members
Posts: 1145
Joined: 15-January 05
Member No.: 188432
Xbox Version: unk
hey guys, my xboxHDM didnt come with a C, E or Eeprom folders within the linux folder. can i just create those two folders or was it suppose to come with C and E folders that had some necessary files in there?