xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Ms28 + Nf4 Flash Problem
FuzzyL
post Dec 10 2006, 07:15 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 19
Joined: 8-December 06
Member No.: 316619
My 360 has an ms28 and I have a DFI ultra-d board which i'm using to flash the 360 with. I have all of the utilities on a floppy that are needed but when I get to the part where I enter "mtkflash r /m orig.bin", select my SATA device (there are 4 in the list, I tried them all multiple times) and then hit escape I recieve Status 51 should be 70. RAID is disabled in the bios and there is nothing connected to the motherboard except for the SATA cable going to the xbox and one IDE cable going to a normal dvd-rw drive because the computer will not startup without this plugged in. I have tried attempting to flash it turning the xbox on and then the pc and vice versa, same problem either way. I also tried using the Enable0800 which didn't help.

Any ideas what I could be doing wrong / should try? uhh.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Alcoholx
post Dec 10 2006, 09:06 AM
Post #2


X-S Member
*

Group: Members
Posts: 69
Joined: 16-August 06
Member No.: 295157
QUOTE(FuzzyL @ Dec 10 2006, 06:22 AM) *

My 360 has an ms28 and I have a DFI ultra-d board which i'm using to flash the 360 with. I have all of the utilities on a floppy that are needed but when I get to the part where I enter "mtkflash r /m orig.bin", select my SATA device (there are 4 in the list, I tried them all multiple times) and then hit escape I recieve Status 51 should be 70. RAID is disabled in the bios and there is nothing connected to the motherboard except for the SATA cable going to the xbox and one IDE cable going to a normal dvd-rw drive because the computer will not startup without this plugged in. I have tried attempting to flash it turning the xbox on and then the pc and vice versa, same problem either way. I also tried using the Enable0800 which didn't help.

Any ideas what I could be doing wrong / should try? uhh.gif



nf4 chipset will require the vcc trick, basically remove a resistor on the board of the ms28 and put a switch in its place ( makes future flashing easier.

or you could buy a sata card wioth a via chipset.. that will make flashing the drive a peice of cake.

all the info is on this forum.. search and you will find
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
w4rrior
post Dec 10 2006, 12:53 PM
Post #3


X-S Member
*

Group: Members
Posts: 117
Joined: 17-November 05
Member No.: 258662
Xbox Version: unk
360 version: unknown
I bought one of these http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=200051918245

soon as it gets here I can flash my ms28

I was told it worked flawlessly so can't wait biggrin.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
FuzzyL
post Dec 11 2006, 04:22 AM
Post #4


X-S Enthusiast


Group: Members
Posts: 19
Joined: 8-December 06
Member No.: 316619
QUOTE(w4rrior @ Dec 10 2006, 01:00 PM) *

I bought one of these http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...em=200051918245

soon as it gets here I can flash my ms28

I was told it worked flawlessly so can't wait biggrin.gif



I just ordered the same exact card from the same seller, thanks for the post bro appreciate it. I decided go with the VIA chipset instead of opening the DVD drive and doing the trick thing, the safe way out.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
memito
post Dec 11 2006, 06:46 AM
Post #5


X-S Enthusiast


Group: Members
Posts: 1
Joined: 11-December 06
Member No.: 317121
hello, can you show me a picture of the vcc mod in a samsung ms28 and can i use mktflash??? please
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
x360_CZE
post Dec 11 2006, 12:10 PM
Post #6


X-S Enthusiast


Group: Members
Posts: 11
Joined: 23-November 06
Member No.: 313300
I ordered same card from that seller. I hope it arrives in Europe soon smile.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
moley85
post Feb 10 2007, 10:33 AM
Post #7


X-S Enthusiast


Group: Members
Posts: 7
Joined: 10-February 07
Member No.: 328710
this card working ok off ebay??
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 24th May 2013 - 08:31 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx