xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Smartxx Doesn't Work, Xbox Runs Fine?
Gator417
post Oct 26 2011, 12:18 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 3
Joined: 18-September 11
Member No.: 457396
I've installed a Smartxx modchip. The Xbox works fine and the blue light on the chip comes on. The Xbox won't turn on the modchip and it won't recognize the disc that came with the chip. The D0 wire looks like it is fine. I don't know what else to look for to troubleshoot the install. I bought another Xbox and re-installed the chip in it and the same thing happens. I've looked all over the Smartxx disc and haven't found anything to help me. Is it possible I blew out the modchip? I didn't think so because the blue light still works, but I'm a newb so its a good guess. Thanks for your help.
Gator

This post has been edited by Gator417: Oct 26 2011, 12:19 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
steveo1978
post Oct 28 2011, 01:03 AM
Post #2


Super Moderator
*****

Group: Head Moderator
Posts: 1947
Joined: 7-May 08
From: north carolina
Member No.: 380500
Xbox Version: v1.2
360 version: v4.0 (jasper)
try grounding d0 and see what happens. I beleive if the chip was dead and eevrything was hooked up right then the xbox would just frag instead of booting to the dash. Just solder the d0 from the xbox motherboard to a grond on the motherboard (like the copper around the motherboard screw holes) If the xbox frags after doing that recheck the soldering on the lpc and chip.

This post has been edited by steveo1978: Oct 28 2011, 01:04 AM
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gator417
post Oct 28 2011, 04:14 PM
Post #3


X-S Enthusiast


Group: Members
Posts: 3
Joined: 18-September 11
Member No.: 457396
OK thanks. I'll do that tonight. I had a feeling it was the D0 but its such a pain, I was hoping it was something else.
Gator
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gator417
post Nov 14 2011, 12:28 AM
Post #4


X-S Enthusiast


Group: Members
Posts: 3
Joined: 18-September 11
Member No.: 457396
Thanks for the help. Bought an X2.6 and installed the pin header. Put the Smartxx chip on it. Now with the D0 not grounded, the Xbox starts just fine and sounds like its working, but there is no output to the tv. With the D0 grounded, it frags really bad, and I can't open the drive either way. At least I know the D0 is grounded proper like this time.
Gator
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
JohnnyHunng
post Nov 14 2011, 05:57 PM
Post #5


X-S Freak
*****

Group: Members
Posts: 1244
Joined: 20-September 04
From: Way Down South
Member No.: 148810
Xbox Version: unk
recheck/re-solder your LPC points...where you installed the pinheader.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 26th May 2013 - 04:04 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx