Joined: 15-August 07
Member No.: 352570
I have a 360 which Gets 3RROD then the DVD drive spins up and it gets 2RROD within about 5 seconds.
I left it on for about an hour and it didnt heat up at all. I took off the heatsinks and cleaned off the old thermal paste and applied some new Arctic silver 5 evenly. I dont know where to go from here, Help?
Joined: 9-June 05
Member No.: 226196
Xbox Version: unk
360 version: unknown
If you are using washers get rid of them. That seems to be the biggest issue. As soon as I got rid of them my 360 was all better. 2 RRoD = overheating (strange you don't feel an heat). Just finger tightened the screws, let the unit overheat for 5 mitnues or so, power off, let it cool down then tighten the screws with a screw driver - not too tight!