xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> 0013 Error After Professional Reball
GNasTyx
post Feb 3 2012, 09:16 PM
Post #1


X-S Enthusiast


Group: Members
Posts: 9
Joined: 2-May 11
Member No.: 453163
i have an older xbox 360 with a hitatchi drive in it. i xclamp fixed it awhile back it lasted for abount 6 months then i got it reballed by a professional about 4 months ago and about 2 weeks ago i turned on my box and after about 5 minutes the fans started to get really lound and then the box shut off and gave me 2 red lights. so i did the error test and it came up with 0013. i did some research and found out that its the ram overheating. so im sure that has nothing to do with the gpu or cpu so the reball was fine im guessing. so now im in the mood to fix it my question to you guys is what is the best way to go about it? should i heatgun? (i would prefer to do this) if i heatgun what parts should i actually heatgun i dont think i need to do the gpu and cpu since they have been reballed so how should i go about doing this? any info will help thanks in advance
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
BoNg420
post Feb 3 2012, 10:14 PM
Post #2


X-S Messiah
*******

Group: Head Moderator
Posts: 3766
Joined: 4-November 04
From: USA
Member No.: 163327
Xbox Version: none
360 version: v5.0 (360S - trinity)
I would buy a new xbox 360. Sounds like a waste to keep reviving this one.

Heat guns are bad btw to use on xbox 360. Its best to have the proper equipment if you want a properly fixed product.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
digipimp75
post Feb 3 2012, 11:50 PM
Post #3


X-S Senior Member
**

Group: Members
Posts: 286
Joined: 2-December 09
Member No.: 427156
2 red lights is usually just overheating. It sounds like the heatsinks aren't sitting flush. Perhaps an xclamp popped off or something? Don't go blasting it with heat just yet! It could be something very, very simple.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
GNasTyx
post Feb 4 2012, 06:05 AM
Post #4


X-S Enthusiast


Group: Members
Posts: 9
Joined: 2-May 11
Member No.: 453163
QUOTE(digipimp75 @ Feb 3 2012, 04:50 PM) *

2 red lights is usually just overheating. It sounds like the heatsinks aren't sitting flush. Perhaps an xclamp popped off or something? Don't go blasting it with heat just yet! It could be something very, very simple.


ive tried all of that im sure its not a simple problem like that any further advice?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Gazc0igne
post Feb 4 2012, 01:10 PM
Post #5


X-S X-perience
**

Group: Members
Posts: 417
Joined: 29-July 11
From: Belfast, United Kingdom
Member No.: 455865
Xbox Version: v1.6
360 version: v3.0 (falcon)
2ROL is caused by bridged/cold solder joints under one of the RAM chips 99% of the time its the two on the top side of the board besife the GPU

inject liquid flux inder them and hit it with a heatgun CAREFULLY, RAM chips cn be fucked up quite easily

fixed prob 20+ consoles with this error personally.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
GNasTyx
post Feb 4 2012, 11:54 PM
Post #6


X-S Enthusiast


Group: Members
Posts: 9
Joined: 2-May 11
Member No.: 453163
QUOTE(Gazc0igne @ Feb 4 2012, 06:10 AM) *

2ROL is caused by bridged/cold solder joints under one of the RAM chips 99% of the time its the two on the top side of the board besife the GPU

inject liquid flux inder them and hit it with a heatgun CAREFULLY, RAM chips cn be fucked up quite easily

fixed prob 20+ consoles with this error personally.

How long should i gun it for and i shouldent have to do the cpu n gpu chips right? And where can i get this flux from
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 21st May 2013 - 12:50 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx