QUOTE(tmoney_man @ Jun 12 2006, 08:41 PM)
Make sure you don't write or put any labels on the dual layers...That will cause an unreconzible disc. If you were able to boot into the backups and play them shortly, than its not a fw problem. I know this may seem like a brain dead answer, but its most likely the media/brand of dual layers your using.
I've not written or labeled any of the dvds. I've never been able to boot a backup since i flashed it, only originals. So I suppose this means it could be the firmware? The media has been confirmed working. I've tried inserting the key both with hex workshop and also kdx 1.5. I've then loaded both my original firmware and modified into kdx to make sure they match. I've read other posts where ppl have said they have had to write the firmware to the drive multiple times to make it work, is this for real? Is there anybody with a pioneer 109 who can give me any pointers? Starting to piss me off now....hehe
QUOTE(cerealkillajme @ Jun 12 2006, 08:55 PM)
Open tray is when the disc works, just that the 360 DVD drive doesn't want to read the disc.
Double check that your key is correct (those automated programs are shotty).
If you didn't unlock the drive correctly you should get "put this disc in an Xbox 360 console" (at least that's what I got when I didn't unlock it first, or though I had, lol).
Hope that helps some m8.
I did get the "put this disc in a...." msg on my first flash, but when i re did the key it just says "unreconized disc"
I've just put one of the backups in dvdinfo pro and it does say the booktype is set to dvd-rom. Am i write in saying I just open clone cd and burn the .dvd file without doing anything else? Anybody know why when i select burn at 1x it still burns at 2.4?
Really appreciate the help fellas