Group: Members
Posts: 18
Joined: 27-February 09
Member No.: 406174
buddy i have no clue only thing i know is i was trying to repair a freezing issue i went to flash my nand via usb & xell reloaded but it froze & i had to power off the xbox 360 & now it doesnt boot its got power but no display & red light http://www.youtube.com/watch?v=9CNHa4Z2m0A
Group: Members
Posts: 18
Joined: 27-February 09
Member No.: 406174
You tried to flash the nand through xell reloaded? yes & it froze during the flash updxell.bin on root of your usb druive? no nandflash.bin & xenon.elf
I can't see the video as it's marked as private. lol got to mess with youtube settings
Group: Members
Posts: 807
Joined: 23-June 06
From: San Francisco
Member No.: 287206
Xbox Version: v1.6
360 version: v4.0 (jasper)
it depends what happened. do you have an orig.bin you saved somewhere? if not it doesn't matter what you do!. unless your problem is related to a wire on the modchip falling off and shorting somewhere. honestly that is all u can hope for if you don't have orig.bin.
Group: Members
Posts: 807
Joined: 23-June 06
From: San Francisco
Member No.: 287206
Xbox Version: v1.6
360 version: v4.0 (jasper)
you're only option is to use your hardware flasher and do it over again. No Xell available because something got corrupted. You need physical wired access. If you cannot do this then you need to contact someone who can. Someone like me can provide that service
Group: Members
Posts: 18
Joined: 27-February 09
Member No.: 406174
QUOTE
you're only option is to use your hardware flasher and do it over again.
dont got 1
QUOTE
No Xell available because something got corrupted. You need physical wired access. If you cannot do this then you need to contact someone who can. Someone like me can provide that service
That's all there is.
yup thats what im trying to do but some one from st.louis mo