Tutorial: Backup/burn/stealth Verify With Xbc & Imgburn, Questions and Discussion Options

[sosotiit]

This thread is only for question and discussion on the tutorial presented in
Tutorial On Making Backup With Xbc / Imgburn

RIPPING
1-Open XBC ,
2-Select your ripping drive like Kreon or Samsung/Benq drive
3-Place your game in the drive,
4-Press Start (with Complete Backup" selected),


BURNING WITH IMGBURN called by XBC

1-Open XBCr* , select IMGBURN as burning engine
2-Select your burning drive ,
3-Place a blank DVD+R DL the drive,
4-Press Start , select the .ISO file you have just created
5-Imgburn will start

Complete tutorial

soso

This post has been edited by sosotiit: Dec 22 2008, 04:43 AM

[ashegam]

I know the iso size is around 7.xxGB before burning it. But is it normal for the dvd to show only 3.51MB of info after the burn? The burn marks are all the way out to the edges of the dvd so it looks like it was a large file burn, but on the dvd there is only a video ts and audio ts folder and they only have 3.51 mb of info on them. Is this a proper burn?

Also how can you find out the name of the game burnt on a dvd, with out obviously playing it in an xbox.

[sosotiit]

if you right clic in windows then yes.
if you want to check your burn in order to see if everything is there, put it is XBC and do a stealth check using the Drive Tools tab, or a full validate of the burn against the image in How to verify a burn

soso

[ashegam]

ok, that's a big relief for me because it was showing that in windows but under xbc everything looked good. ty.

[nidx]

I am just curious if anyone has tested XBC to see if it work with the Windows 7 beta, I want to switch but need to be sure this app will work.

[Arcriku]

Ok when i put my real xbox 360 game in it loads up but it doesn't say start on XBC, like it won't let you click it, and also at the top where it says media type it show DVD-ROM with the real xbox360 game. Can you plz solve my problem??? and also can you pm me if you find out the problem.

This post has been edited by Arcriku: Mar 15 2009, 03:47 AM

[DeathBringer007]

Okay so i have the .dvd and .iso files for halo 3, and i followed all the steps to burn it. It took around 30 minutes to burn it onto my DVD +R DL disk without any errors. but when i put it into my xbox 360 it just says that to play it i must put it into an xbox 360... what is wrong? please help me out!

[BlackWar]

1: to rip a game, you need either a special PC-DVDROM drive flashed with kreon FW (AKA kreon drive) (sp?) or use your 360's drive flashed with the 0800 fw to read the games. The info is on these boards so dont bother PM'ing me on how to do this.

2: to play backup games (from the disks you own) you have to have the fw flashed on the 360's dvd-rom drive in order for it to read them properly. Just like above, the info is all here on these forums, search for it.

3: From my experiences, XBC 2.8 and imgburn (latest as of this writing) work just fine in win7 (using 64bit verson here, and assuming that you run them with admin privliges). Granted each users mileage may vary. Please keep in mind tho, I have yet to update my benq drive to the latest fw (still running 1.41) so their *might* be issues with how it works with the new 1.51+ fw's.

This post has been edited by BlackWar: Mar 22 2009, 11:43 PM

[kaneda_77]

I had a kreon drive ts-h353b flashed to kreon 1.00 firmware. My sata chipset didn't support it and I am too lazy to get a card for it.

Instead I used the samsung ts-h943 drive with the xtreme 0800 firmware. It's great for backing up my 360 games. However, xbox 1 games are not working at all. It freezes/stops at 5.46% on every one and gives me the can not open partition error.

I tried tweaking the settings(drive specific, xbox1), but each time it's a no go. Any recommendations or tips?

[lefos]

Someone help me out?

I put the disc in my benq 0800 flashed drive, window sees it, and xbc doesn't.

When I put the game (this is an original disc) into my regular drive, xbc can see it, but it will not let me rip because it only sees the video part, as 3.52MB or w./e.

What do I do to get XBC to recognize my drive? P.S. I currently have 5 cd drives recognized by my system, 3 read in xbc.

[lefos]

Got it. It was merely a bad flash of the drive. Got my first rip done

[ledezma2003]

Hi i have the sh-D162D and kreon firmware 1.00 and it takes over an hour to rip any suggestions?

[Circaflex]

Hi i have the sh-D162D and kreon firmware 1.00 and it takes over an hour to rip any suggestions?

Mine takes <15minutes, so something isnt right.

[The_Nightfly]

Hello everybody,

I have a problem with ripping my xbox360games. I have a SH-D163D with Kreon V1.0 and it has worked some time ago. I used XBC und ripping was no problem at all.

I just tried to rip a new game and it XBC started to tip (128kb file was on my HDD) and then it stopped by doing nothing at all. No error message, nothing, just 0% and not i byte more.

What could that be? Anydvd is not running while I'm ripping.

Does someone has an idea?

Does the SH Drive have to be Master or Slave?

Thx

[d9988]

I have a question about the size of the images:

5-When completed, you will get a 7 651 848KB ISO ( or 7.29GB) or 7,651,262KB depending on the x360 games. If you do not activate the Splitvid then the files will be 7,395,392KB or 7.05GB. The .iso for Xbox1 will be 7,258,816KB (or 6.92GB) without splitvid.

It's been a while since I used XBC (early this year). My drive is the SH-D162C with 1.0 kreon firmware. I did update XBC to v2.9 build 0306 yesterday, although I did not update the drive firmware since it already was at 1.0.

The last game I did rip is Ninja Gaiden 2 (I think that was done with XBC 2.7). It came out as 7.05 GB/7,395,392KB which matches one of the sizes above.

The games I just ripped, Madden 2010 and NCAA 2010 (from originals) come out with different sizes. they are both 7.29 GB/7,654,876KB, which is a little off from the above noted size.

Do newer games have different sizes or is this not normal??

This post has been edited by d9988: Oct 22 2009, 01:02 AM