xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Help Removing Analog Sticks
UltimateP3
post May 11 2009, 06:38 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 3
Joined: 4-March 09
Member No.: 406615
I was working on my arcade stick and I decided to remove the sticks. I started by removing the left stick and then addig the 4 resistors but the x axis is a little wacky, it is always pointing right and after I resoldered the resistors it started pointing all directions. I think i might have removed the soldering spot from the x axis but when I tried soldering a cable at an alternate point it didnīt work. Any ideas on how to fix this? Would cutting the traces from the x axis solve the problem?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
RDC
post May 11 2009, 01:52 PM
Post #2


X-S Seraphic
************

Group: Head Moderator
Posts: 8706
Joined: 16-December 03
From: VA
Member No.: 82718
Xbox Version: v1.0
360 version: v1 (xenon)
If you've removed the Sticks and jacked up the traces cutting them up more isn't going to fix anything. You need to get the 4 Resistors (all the same value, 10K or so, long as all 4 are the same value) in there so the Analog lines stay centered. Without seeing exactly what ya did and knowing which controller you're working on no one is going to be able to help ya out too much.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
UltimateP3
post May 11 2009, 09:38 PM
Post #3


X-S Enthusiast


Group: Members
Posts: 3
Joined: 4-March 09
Member No.: 406615
Iīm working on a wireless controller, the non common ground. After examining the controller again I saw that non of the traces were broken, but the controller is still pointing down and right.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 24th May 2013 - 01:29 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx