I have a quick question that i need a quick answer to. I'm an installing a duox2 as we speak, and i have an extra xecuter 1.6 rebuild board and i was wondering if this rebuild board will work with the duox2? I traced all the wires and everything, but there is one point that goes to a different spot then the duox2 install manual shows. On the duox2 is shows i need to connect one of the lpc holes to a point on the mobo, but on the rebuild board that lpc hole is connected to another lpc hole that is not used by the duox2. Will it still work? Thanks for the help guys
Edit: NM, just after i posted this i got the smart idea to test, with an ohm meter, to see if that lpc hole is connected to the point on the mobo that the duox2 shows we have to connect that other lpc hole to and sure enough they are. So then the duox2 should work with the xecuter lpc rebuild board....just to let you guys know. lol. Thanks anyways.
This post has been edited by FoxRacR17: Jun 6 2005, 09:53 PM