QUOTE(run187 @ Jul 8 2009, 04:28 PM)
t10 and t 8 for the small one that dont need to come off or just pay there 3 pounds for the kit i linked which i knwo works beacuse i own one saves arsing around with mini screw drivers
Alright, Thanks for the info. I'm going to try t10 and t8. I'm a little be sleezy o ordering stuff online, so ill back out on that. Here the kit goes for 14.95 CAN.
QUOTE(mohamdawg @ Jul 8 2009, 04:21 PM)
You just need something that will fit through the 360's vent holes and something flat that will fit in the holes in the back. For the screws, if you don't use a Torx screwdriver and opt for anything else, there is a VERY high chance that you'll strip it, so just go to a hardware store (or you might even try your luck at a pawn shop) and buy a cheap toolbox with the size that the xbox 360 uses ( i forgot the exact number
Alright, thanks. I'm going to look for some tools in my tool shed instead of going to the pawn. I'm feelin lazy.
QUOTE(run187 @ Jul 8 2009, 04:21 PM)
the opening kits about 2 pound off ebay and wont fuck your case up like ripping the top off will
I'm just gonna use some of my tools. Hopefully I don't screw up taking it apart lmfao.