Configmagic Broke My Xbox..., well, configmagic was the gun "I" pulled the trigger Options

[JaWzZz]

I was trying to lock a seagate HDD for my friends softmod. So i put his HDD in my xbox and tried locking it with configmagic. I just ended up fragging my xbox, by zeroing the eeprom (im pretty sure). And i never backed up the eeprom from myn, lesson learned, BACKUP

My xbox:
Crystal v1.6b (hynix ram)
UnleashX
Duo x2 Lite (not sure the bios)
200GB Samsung HDD

now when i boot up, no video, no audio, no eject (manually open it). Power button, Green light flashes three time fast then flashes slower, then solid. Eject button continues flashing slower.

What do i do?

Can i install the Duo x2 lite in another xbox and flash it with x2 5035 (which still boots with bad eeprom, i think?)
would making a flashcromwell 3.0.3 dvd work?

I just dont know what i can do when the xbox wont boot up.

Thanks for any help.

[xboxmods2977]

Can i install the Duo x2 lite in another xbox and flash it with x2 5035 (which still boots with bad eeprom, i think?)

If the DuoX will hold a 512k bios, then yes. It shouldn't be a problem.

[JaWzZz]

So is my xbox toast? Because i cant get any Discs to boot. Flashbios 303, slayers, tried that cromwell_patched.bin but wont boot.

Could another dvd drive work? Cause if nothings booting what do i do?

[shambles1980]

duox2 should have 2x 512k banks.

you can flash the duo in a diferent xbox.
if you cant boot from dvd i have edited a copy of hexen to work from hdd "for this kind of stuff"

but you wou;d need to boot to a modified dash to use that.

if the chip is inatlled on a new box you can always just use a y splitter to power a pc dvd drive whilst thye xbox drive is still connected to the mother board using the xbox p[ower cable. but the ide cable would connect to the pc drive.
"boot from the pc drive."

you could always just re write the eeprom with an eeprom writer though.

This post has been edited by shambles1980: Oct 8 2012, 05:16 PM