Whats Best Hard Mod Or Soft Mod At This Moment Options

[boxer29]

i know this has been answered before
but want to know from the experts
what is best to modify a xbox at this moment soft mod or hard mod
just want to put xbmc and run some emulators after putting a big hdd
what do you guys recommend here
if hard mod what to use
what to use for soft mod
thanks

[Heimdall]

They both do the same thing.

Hardmod = chip or TSOP, BIOS depends on your Xbox and the chip you choose.
Softmod = Krayzie 1.1.1

[boxer29]

dont have the xbox usb cable
i was thinking of hot swapping with ndure ,made a cd out with ndure 3.0
then found out ndure 3.1 is out as well
what you recommend ndure 3.0 or 3.1
thanks
ps have done hot swap earlier ,thats why trying it again

[Heimdall]

3.1, and read the link in my signature for an overview of the method.

[boxer29]

3.1, and read the link in my signature for an overview of the method.

thanks
i know this option is optional
2 Softmod and Nkpatcher Options
what should i check and what should i left uncheck
will there be an option to change these in later stage say if i want to connect my xbox to a monitor for example
should i check them ,
are they easy to do later if i dont tick them up
can you explain
say for example
i want to add 160 gb hdd now
there is no need to tick this option Use Nkpatcher .06
but if i want to add one 500 gb hdd later will it allow me to do
can it be done easily or you have to tick the option and use it at later stage
how to proceed
there are 6 options in total to choose from
what you recomend

[Heimdall]

I recommend that you read the instructions......

Run Kingroach NDURE 3.1, select your Kernel version under "Kernel Selection" and select "Create XBOXHDM Installer" - leave all other options at default.

[boxer29]

ok thank
thats how i made the old cd with ndure version 3.0
now will make another with ndure ver3.1
thanks

This post has been edited by boxer29: Mar 6 2012, 11:53 AM