Help Me With My Xbox Options

[nolimit5005]

i have jasper 512mb

after i installed the cool runner and i got the cpu key i build the hacked image using

multibuilder 0.7 i tried to flash the updflash.bin using rawflash 3 on xell with the usb

stick (didn't use the fan in this stage)while flashing i got a lot of error (error processing

block ......) then after he finished (about 10min to flash) the console shut down

automatic and the orange led of the power supply turned into red and after i restarted

the console(used the fan in this stage) 5 or 6 sec the speed of the fan has increased

then the console shut down again and the psu turned into red when i started it again i

got only black screen and the middle green led only i tried to flash the updflash.bin

using LPT cable also the same thing when i tried to flash the original i got 0022 RROD

about 30 sec from starting the console.


now i am stuck with the RROD 0022 with the original nand an black screen on the

hacked image and also black screen when write the .ECC image

[djexentrix]

Have you tried switching the coolrunner to prog to disable it while trying to boot original nand image? You say you got the cpu key, so that means you must have had xell boot at least once? What revision of coolrunner are you using?