QUOTE(ZprivateZ @ Apr 15 2010, 03:25 AM)
If you followed that guide for the xellous part you never had to inject you config it should have already been there in the original nand your just dumping it, your only injecting your kv and xellous into xell for your board then flashing. I see you have a nand dump of 66mb you can get your config from it and compare it with your others because if you can flash that back and all is good then you should be able to get a good config from it.
I never injected the config.bin. I just said that the dumped config.bin was empty. That is what I get when I dump it from the original nand dump. I would like some input from someone who has working 512MB Jasper PLEASE!