Flashing Hy29f080 Tsop Options

[csmarauder]

This is really kicking my ass. I have a v1.1 xbox with the hynix tsop on it.
I soldered the points. Slapped on my chamelon loaded up my backup off 007.
Loaded the evox save and tryed to flash the onboard.

Yes I checked my points with a meter!
Yes I have the proper definitions in the evox.ini file!

What does happen when I goto into the flash bios option it gives me the
chamelon bios of amdxxxxxx. So i pulled the mod chip out and tryed it again.
This time unknow type so I restart 007 and pull the chip before I load the save
game and the xbox freezes. Then I do it again and pull it when evox starts from the hack
ed game. This type it says unknown type again!

What is wacked is that ive done this method on 12 or more differnt models all
with different types of tsops and version and not once have I had a problem.

Next step is to rent 007 orginal and try it with out the mod chip installed.

Any thoughts?

[1nick9]

by doin this u r makin the xbox try to flash the chamelon as as when u take out the mod the xbox is try to flash the mod and its not there so the xbox says !!unknown flash!! anyway to falsh it with 007auf u need to hav the bios load from the TSOP so u would need a origianl version of 007auf. but u can flash the TSop using chamelon
see here!!
and here


cheers
ps: read me b4 posting