Group: Members
Posts: 10
Joined: 15-December 02
Member No.: 13483
I've been trying to set the IP address of my xbox so that I can backup the original harddisk to my PC for many times. Using Slayer's Auto Installer 2.5, I tried to set the IP address but the IP always changes back to what it was originally (192.168.1.200) after I reboot the box. I suppose that because I didn't save after the changes, but I'm unable to locate a "Save" option at the bottom of "system settings" ???
How do I save my changes? Is this because I'm running Evox on CD instead of the harddisk?
I've my chip modded with ALX2+ running Executor2 bios, if I'm to install Evox, does it overwrite the MS dashboard, or does it load Evox only when I'm running the mod chip and the original dash when I run the original chip?
Group: Members
Posts: 10
Joined: 15-December 02
Member No.: 13483
Meaning this are the things I should do....
1. Get a copy of Slayer's Auto Installer onto PC and configure its .ini file to proper network settings
2. Burn the ISO into a cdr
3. Then only can i do the networking from xbox to PC so that I can backup the original dash
Since there's no way I can do any network configuration with Evox on CD, and that I want to backup the original dash without any installation of Evox, this the only thing I can do....please correct me if i'm wrong...
Group: Members
Posts: 10
Joined: 15-December 02
Member No.: 13483
I figured I'll just remove the original harddisk without doing anything to it.... buy a new 120G harddisk, install it and use Slayer's Installer to format the harddisk and install everything there.... then i'll not have to worry about FTPing at all
If anything happens at least the original harddisk is still left untouched.....
Group: Members
Posts: 2062
Joined: 7-January 03
Member No.: 17012
Xbox Version: none
360 version: none
Ummm... have you tried changing the IP address of your PC instead? In this case, 192.168.1.1 with a subnet mask 255.255.255.0 should do. Gateway won't matter in this case.