xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Help Beeping Problems!, Xbox Beeping Problems
SimeX
post Feb 3 2004, 06:19 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 2
Joined: 11-August 03
Member No.: 55614
Ok, I just installed the xecuter 2.3b lite + modchip, i have made sure that d0 is aligned correctly, all 3 lights show when the switch is off and only the blues when the chip is on. The chip seems to be set perfectly. However... this is when the problem occurs

I turn off the xbox, enable the mod-chip, then turn the xbox back on... immediately i hear a beep sound followed by the xbox turning itself off, then it turns itself back on, then another beep sound, then it turned itself off again, then turns itself on again and this time it stays on. Just sits there, my TV's screen stays the same, I get no black screen or anything at all. I have been messing with this problem for days and I am completely stumped... i have no idea what is wrong.

If anyone can help, PLEASE do so. I'm starting to become very frustrated with the whole process. Let me know biggrin.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
SimeX
post Feb 3 2004, 06:30 AM
Post #2


X-S Enthusiast


Group: Members
Posts: 2
Joined: 11-August 03
Member No.: 55614
btw, the xbox boots and works just fine when the chip is disabled before turning it on.. the problem only occurs when the chip is enabled before turning it on... anyone that can help, please do so..
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
floppy
post Feb 16 2004, 09:44 AM
Post #3


X-S Enthusiast


Group: Members
Posts: 17
Joined: 10-February 04
Member No.: 99097
Hi m8...

got exactly the same problem with an Applex-V chip in a v1.0 XBOX - works fine in a different veriosn but tried 2 v1.0 boxes and both giver same symptoms!!!

Doin' me head in!!!

Floppy
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Soup
post Feb 16 2004, 10:42 AM
Post #4


X-S Senior Member
**

Group: Members
Posts: 244
Joined: 13-January 04
Member No.: 91623
Xbox Version: v1.0
I'm betting your Xbox power light flashes red and green when it finally stays on after the third time. This is called fragging (flashing red and green) and is most commonly caused by a good d0 connection, but a bad LPC connection.

The Xbox will frag whenever it cannot find a bios to load. A good d0 connection (d0 is connected to ground) causes the built-in bios to disable. However if the LPC connection is bad, then no replacement bios can be loaded, and the Xbox will frag. Switching off your modchip essentially breaks the d0 connection, causing the built-in bios to function normally and the Xbox is able to boot without any trouble.

Check your LPC for shorts and connections that aren't being made.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 18th May 2013 - 08:44 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx