Group: Members
Posts: 7
Joined: 23-June 04
Member No.: 126810
My friend just installed a xecuter 2.3b pro in his xbox. We flashed it successfully and started it up and it resets 3 times then xbox led flashes red and green. I looked on the internet for this and all I can come up with is a tsop flash problem but we didn't flash the tsop. Does anyone have any ideas?
Group: Members
Posts: 250
Joined: 21-November 03
Member No.: 75812
Xbox Version: v1.0
It could be a number of things
1 - What BIOS did you flash with? If you used one that won't work on your box - then reflash it 2 - Are you sure the D0 point didn't come loose? 3 - When you DISABLE the chip, does your box work normally?
Group: Members
Posts: 72
Joined: 25-May 04
Member No.: 121922
QUOTE (Retromortal @ Jun 24 2004, 05:17 AM)
I looked on the internet for this and all I can come up with is a tsop flash problem
Sure you did
Its the most postd about topic FRAG (FLASHING RED AND GREEN)
Its documented a hundred thousand times
The flash was either not sucessful or switches are not correct or the bios was corrupt or the mod is installed bad or the d0 line is shorting to another part of the motherboard.