Tsop Flash Enable Points Pics, ANOTHER TUTORIAL! Options

[davicoro]

HERE IS SOME PICS OF THE ENABLE POINTS

PIC 1: 1.0 - 1.1 TSOP ENABLE POINTS (NOT FOR SHARP TSOP)

PIC 2: 1.0 - 1.1 SHARP ENABLE POINTS (ONLY FOR SHARP TSOP)

PIC 3: 1.2 - 1.5 TSOP ENABLE POINTS

=====================================================
=====================================================

- ENABLE POINTS FOR XBOX V 1.0 - 1.1
(DONT WORK WHITH SHARP TSOP)



1 - JOIN THE TWO POINTS ON THE BLUE "0"
(ONE ON TOP OF THE MOBO AND ONE UNDER)

2 - THEN FLASH

=====================================================
=====================================================

- ENABLE POINTS FOR XBOX V 1.0 - 1.1 WITH SHARP TSOP
(SORRY... I DONT FIND A TRUE SHARP)



1 - JOIN THE POINT ON THE BLUE "0"
(UNDER MOBO)

2 - JOIN THE WIRE
(UNDER MOBO)

3 - USE TWO LONG WIRE ONE ON "A" AND OTHER ON "B"
(TOP OF THE MOBO)

4 - TURN ON THE XBOX AND WHEN YOU ARE READY TO FLASH TWIST THE WIRE "A" WITH THE WIRE "B"

5 - NOW FLASH

=====================================================
=====================================================

- ENABLE POINTS FOR XBOX 1.2 - 1.5



1 - JOIN THE TWO POINTS ON THE BLUE "0"
(ONE ON TOP OF THE MOBO AND ONE UNDER)

2 - NOW FLASH
=====================================================


PLEASE... DONT PUT A WIRE FROM D0 TO GROUND

This post has been edited by davicoro: Jun 26 2004, 01:40 AM

[bucko]

Awsome hi-res pics, may come in handy one day.

[davicoro]

maybe...

i hope that someone like the sharp tsop..

[Krusty2k]

just so people dont get confused. On a 1.2 - 1.5 you only joint the two points shown on the FRONT (or top) of the Mobo. I think this is what the poster said, but when i read it, I had to second guess. I think he meant front as in the front of the case where the power button is, and back where the fan is.

Congrats on the super pics they rock!!!!

[davicoro]

[formulanerd]

great pictures amigo! muchos gracias!

This post has been edited by formulanerd: Jan 24 2005, 07:48 AM

[JohnnyHunng]

These pics r so old, i think lordvader had em in his sig for ages.

[ReRuss]

1.2-1.5 doesnt have bottom points?

[lordvader129]

1.2-1.5 doesnt have bottom points?

there is one set of obottom points, but the are identical to the second top set, so tehres no point in bothering with them

[ReRuss]

I dont have to solder bottom points then?

[lordvader129]

I dont have to solder bottom points then?

no, and thats why they arent pictured in this tutorial, lol

[ReRuss]

I seen some other guides that shown bottom points on 1.2/1.3 and 1.2-1.5

Seein as how I only need top points I should pop open my 1.3(?) box and bridge those points

Btw , what BIOs is best to use? I know there's like X2 (Just get latest?) and EvoX (M7 or M8?) , and is EvoX good at flashin the TSOP?

And what I do if it doesnt flash right

[Iloveanime]

I have modded a few 1.0's and 1.1's and I have never needed to add the little wire on the bottom from the lpc to a joint. I just solder the spot on the top and I solder the two joints beside the screw but the wire. I have never used and I mine have been working like a charm. What's the purpose of the wire? Anyway Later

[FrostyTheSnowman]

That wire is only necessary for people with SHARP TSOPs. The SHARP TSOP requires more power to be erased and flashed.

[plugh]

I am currently running a softmod and evox dash,
but am thinking about doing a tsop flash. The xbox
has never been opened, but from various readings
I believe it is a v1.0 (bought it used).

I'm currently in the planning stages, but before I open
the thing I was wondering if there was any handy utility
I could run that would tell me what type of flash I had -
in particular, if it was a Sharp TSOP or not.

Thanks!

This post has been edited by plugh: Sep 17 2006, 12:59 AM