Joined: 3-August 04
Member No.: 135791
Xbox Version: unk
Hey everyone i just cleared out the jewel on my xbox with Maxima Contact Brake Cleaner that i use for my dirtbikes. I read a thread saying that it worked good. so i gave it a try. It worked real good, so good that all of the silver lettering was gone after i rubbed it all out. What would look good to put in the lettering to make it look decent. any suggestions would help.
Joined: 30-September 04
Member No.: 151716
you could get some silver apint and put it in then when all dry sand the spill parts off or use something else and touch it up with paint thinner OR put UV reactive stuff in and have some uv light under it, that would be pretty badass too see, IN FACT I might just go try that.
Joined: 3-April 04
Member No.: 111654
Xbox Version: v1.5
QUOTE (holyfrickster07 @ Oct 4 2004, 04:58 AM)
k but what do you guys think of filling in the jewel lettering with a sharpie marker.
I think doing that would look like your sig.
Cheap and dumb.
What I would do is put clear packing tap accross the letters. Then, (It would take some time) cut out the small peices of tape around the lettering and spray paint away. If you take your time it should come out ok.
This post has been edited by yamdankee: Oct 4 2004, 04:15 AM