Have Any Of You Had Any Troble Booting Slayers.. Options

[grim_chel]

after install of new HD. Couse I tried everything and there is no way I can get to the menue. I belive I have everything working but won't boot. (1.1 with x2.3+ lite unlocked formated HD)

[Rylinkus]

IM me @ Rylinkus on AIM and Ill help ya troubleshoot this.

[insane_clown]

Just have a look at the jumper settings of the hard drive make sure it is set correctly ( cable select if the dvd drive is cable select) and check the IDE cables.

If thats not the problem could you give a bit more info like any error numbers or flashing ligts

[grim_chel]

ur AIM is not responding for some reason here is mine gussiOX
Thanks in advance.

[grim_chel]

yeah cables are set correctely and I get green/red flashing with 16 error code. I am running out of Ideaas on what can be wrong...

Anyone else?

This post has been edited by grim_chel: Jan 15 2005, 05:21 AM

[Xombe]

Ah, Error 16... the clock error. Did you have the xbox disconnected from power for more than 3-5 hours when changing the drives?

Ain't nothing gonna boot. Here's why (and what to do about it):

16 - dashboard - Clock cannot be set. Well i wrote earlier another tutorial about this specific error so here it is:

Basically it comes down to this. error 16 has to do with not finding the menu setting with which you can set the clock of the hdd. This happens to a lot of people that:
1. Erase there hdd (original/upgraded) and after that they dont immediatly install the hdd but leave the xbox without power longer than 5 hours.

It's all about the hdd can;t find the menu with which it can set the clock. This is mostly because the xbox hdd is empty (you removed dashboard or fux0red with ftpp). The problem arises when xbox searches for menu to set clock with, can't find it and voila: error 16. Well read on please!

So you have an error 16 uh? Don't worry "nothing" is broken!

You have an xbox hdd that is locked. And normally you can boot in original and modded mode. Retail or Upgraded doesnt matter. You start playing around with msdashboard.xbe default.xbe that sort off stuff using ftp programs. While doing this you "accidently" remove your msdashboard and also the evo-x dashboard so there is no dash anymore on the xbox hdd. You end the ftp session and after that you shut off your xbox. Normally when you would start up again it gives you an error 13/14 ( no dashboard found). No worries with a slayer evo-x cd all is ok. BUT this is only WITHIN 3 hours or so.

This is becuz the internal clock of the xbox will only be kept alive by the condensators for only 3 hours or 4 . So when you leave your xbox unplugged form electricity for over 5 hours after you have played with the .xbe's AND you have removed your (ms and evox)dash from your xbox than you are fux0red. Why do you ask?
Why can't i boot from cd?

Its as follows
Xbox starts booting==> (almost 1st thing a xbox does is) searches for internal clock==> doesnt find internal clock becuz there hasnt been any electricity on the xbox for 5 hours so battery that kept clock alive is empty and clock is gone.==> searches for the proper dashboard menu to set clock with ==> doesnt find msdashboard or evo-x dashboard menu becuz you have removed it from the hdd for whatever reasons you had==>xbox gives error 16: cannot set clock.

So what do you do about it? Two options!

1. There are some bios'es around that allow the chip to boot past the clocksetting. (do a search!).So how do you get that bios on your chip becuz you cant boot to a flash program or something. Well you need to have an external flasher.

It seems the m8 bios will take care for you of booting past the clocksetting. Or Use the latest executor bios

2. This is the more easy and newbie friendly strategy
-Get a friend with a modded xbox.
-Unlock his hdd with eeprom management from a slayer evo-x cd.
-Than, place his hdd in your xbox.
-Boot with your chip on.
-Now the xbox DOES find a dashboard when you boot in original mode and you can set the time in the msdashboard clock settings.
-Shut off xbox and remove your friends hdd
-PLace his hdd back in his xbox and lock it again
-Install your hdd
-(clock has been set) So boot up with slayer cd.
-Install normally whatever you wanna install
-lock hdd

Not good news, I know, but at least there's a solution for it.

[grim_chel]

Oh my god this is awsome this is what I wanted to hear and have been looking for for past 6 hours. Yes my xbox has been off for about umm lets see here 5-7 monthes?? Xombe thanks you so much where did you get that quote from. If u were near by I would seriously start kissing you. Here is some

EDIT: now another question. since I have unlocked HD and I can plug it into the pc is there any kind of default.xbe I can put on that HD so it would correct time on the mobo (tried to make all the partitions C, D, E.. and placed evox in C, still no luck)

This post has been edited by grim_chel: Jan 15 2005, 05:43 AM

[Xombe]

Hardware Forums > General Hardware/Technical Chat -> A Lot Off Error's Explained In Detail!. It's a pinned topic. Notice how I linked to it for you...

And, no, as far as I know and have ever seen, the only two solutions are the ones listed. Since you've got a X2.3, I'll bet you could find a X2.3 programmer on the Buy & Sell forums pretty cheap.

[grim_chel]

now i'm getting an error 5, even though i have a flashed chip and the drive is unlocked

[Xombe]

Error 5 means your HDD is unlocked. Did you read that link I gave you (twice)...)?

Install a dash like Evox and lock it. Use Slayers if you have to.