Xbox Not Working After Removing Chip Options

[fahad]

hi to all
I have a Xbox (1.0 or 1.1) with ALADDIN MINI Chip.
I buy new X-BIT 1.5 from the internet, I open my Xbox and I remove the ALADDIN MINI Chip and I remove all the wire. after that i test my Xbox and 'it working very fine without and Chip.
I Install the X-BIT 1.5 by Pogopin type and after that I test my Xbox again but it's not working and after 3 time restart the light become RED and GREEN and no video or sound.
I remove the X-BIT chip and I try to install again with wire but I found a very difficult to install the D0 and I think I Break the hole.
I remove every thing and I test my Xbox and I see the same problem nothing is working and after 3 time restart the light become RED and GREEN.

can any one help my to make my Xbox working again.
and If the motherboard Is Breaking from were I can buy another one (from Internet)

I Liveing in Oman in the Middel East.

sorry for my bad english and I hope my problem is clear

[BlackRainbow]

pah... when you uninstall a chip you also have to uninstall the new dashboard... the installation is in the HD not in the chip... (you should have done a backup of your original MS dashboard)... to make it work properly without the chip you have to set is IDENTICALY as it was before modding. I don't know about HD locking...
If you have replaced the hd i think you can still use it but you have still to uninstall all functions that works with the chip...

If you want I can give you further details... btw I need help for this stupid chip that goes out of place every fucking time I touch it.

[Silentscream__]

pah... when you uninstall a chip you also have to uninstall the new dashboard... the installation is in the HD not in the chip... (you should have done a backup of your original MS dashboard)... to make it work properly without the chip you have to set is IDENTICALY as it was before modding. I don't know about HD locking...
If you have replaced the hd i think you can still use it but you have still to uninstall all functions that works with the chip...

If you want I can give you further details... btw I need help for this stupid chip that goes out of place every fucking time I touch it.

Not true, you can leave them other non MS applications on the hard drive without having the chip in. All you really need to do is lock the hard drive.

From what the original poster has described, I would say that he has fucked up the d0 when hje was removing the original chip.
I would try routing the underside d0 point with the topside then making another connection from the underside d0 to one of the d0 pins on the chip.