xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> 2.6ce And Programmer-x
xdownfor20
post Feb 3 2005, 06:12 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 13
Joined: 4-November 04
Member No.: 163274
I accidentally flashed over the cromwell bios on a 2.6CE. I bought a programmer-X and am having problems connecting to the chip. X2 bios manager ver 2.3 says chip not connected, error 0x0900. If I turn the chip off, I get an error of 0xDDDD. The all lights including the blue light comes on when windows boots, but once I try to connect with the bios manager it goes off. If I try to connect as a pro chip, the light just flashes very lightly and gives an error code of 0x1010 switching to 0x0000 and back. What are the wires that came with the programer for? The plugs do not match up to any on the chip. Please Help Me!!!!!!!!!!!

I am running XP and have tried on a 98 machine with similar results.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
xdownfor20
post Feb 4 2005, 03:49 AM
Post #2


X-S Enthusiast


Group: Members
Posts: 13
Joined: 4-November 04
Member No.: 163274
anybody.........c'mon take a WAG
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
smokingmods
post Feb 4 2005, 04:07 AM
Post #3


X-S X-perience
**

Group: Members
Posts: 331
Joined: 21-October 04
From: Dark Side of the Sun
Member No.: 158678
Xbox Version: v1.6d
360 version: v5.0 (360S - trinity)
usual question, do you have the switch attached to the chip? gotta have it, led on the switch should be green red green
and the chip should be lit up blue led
X2BM should recognize the chip as a 2.3 lite, no matter programs fine evn though its a 2.6
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
xdownfor20
post Feb 4 2005, 04:15 AM
Post #4


X-S Enthusiast


Group: Members
Posts: 13
Joined: 4-November 04
Member No.: 163274
Switches are hooked up and alll lights are on. Programer is also plugged directly in LPT port-- not a cable prob.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
xdownfor20
post Feb 6 2005, 09:17 PM
Post #5


X-S Enthusiast


Group: Members
Posts: 13
Joined: 4-November 04
Member No.: 163274
bumpety bump bump
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
cpoore
post Feb 8 2005, 12:19 AM
Post #6


X-S Enthusiast


Group: Members
Posts: 8
Joined: 6-February 05
Member No.: 195886
I'm right there with'ya xdownfor20. I've got the same problem, just with the 2.6lite. Both the red and green LEDs on the programmer light up as well as the blue LED on the mod chip. The chip is set to enabled, flash protect off, and bank 1. I have the programmer plugged straight into the paralell port (no cable or anything). When I bring up the X2 bios manager v2.3 the blue LED on the programmer continually flashes but will not detect the chip. I have verified the LPT port address as well. There doesn't seem to be any documentation on error codes or anything with this programmer.

Any help would be greatly appreciated.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 20th May 2013 - 05:34 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx