Joined: 9-November 04
Member No.: 164912
I am working on an xbox and having some problems. It will not boot at all, no power, sometimes after a few hours of being unplugged it turns on then freezes, its a tsop flash mod. As far as I can tell all the connections are good, and I have tryed with a known working power supply and still nothing. It seems like it is a mobo problem. The solder on the points for the Tsop looks a bit messy, but traces seem fine, and no solder splash. Any ideas at all?
Joined: 22-September 04
Member No.: 149413
seems the problem was I should have checked how many screws I put in, 1.0 - 1.5 have 11 screws my board was a 1.6 only 10 screws. so When I tightened the lid and turned it on there was nothing. Where the 11th screw went the screw port which is metal touched the bottom not sure how to fix this so any help would be grateful. That extra screw on the 1.0 to 1.5 is just below the av socket. Ive tock that off now just need to fix the board.
Joined: 27-August 04
Member No.: 142179
yo jonny, I got an extra resistor that I'll send ya to help ya fix your v1.6 (only cuz you got a X3 control panel kit; you just gotta get it working!!!). shoot me your addy and i'll send one thru snailmail. shippin will be extra if you want it priority. peace.