okey this is what your going to have to do since your eeprom is looking for the number of the hdd and giving the wrong one. (tsop is active again)
i will need to get a modchip (bypass the unmodded tsop) that will boot to the same name of the dashboard u were using initially. for example
if u are using evoX, your mod chip will have to boot evoxdash.xbe.
same with ava and anything else. ( most of these settings can be changed within the bios.
now u also have to know what kind of TSOP u have, winbonds can only be successfullt flashed with raincoat by telnet. and any other. from what i see. work great using the evoX flash utility.
also when u flash the bios. (for example evoX8+) u want to edit it to make sure its booting the correct dashboard as well as u did with the mod chip.
1,2,3 flash. shut off, restart. and there i go. a flashed tsop box that works.
there are articles on how to flash in the tutorial section as well. be sure to enable all soldiering points correctly.
i had trouble with one winbond and i used evox ONLY to see if it was soldierd CORRECTLY. if it doesnt detect it, even with the updated flash codes. then resoldier points