I Need 100% Compatable Bios Verion, Version 1.0 Options

[BlAKnIGhtFoG]

I have a v1.0 with an Xecuter 2.6ce that keeps fragging and has never booted up with the chip enabled(but will when disabled)

I need to know what a 100% compatable BIOS is so that i know when i got it working so i wont have to try something on the LPC then reflash my chip with every bios there is then when that doesnt work id try anoother thing on the lpc and go through the same thing, i think u get the picture. Any help would help out alot.

THis is my first time on xbox-scene, i heard great things about it. I look forward to it.

This post has been edited by BlAKnIGhtFoG: Aug 1 2005, 10:34 AM

[solder_blob]

I have a v1.0 with an Xecuter 2.6ce that keeps fragging and has never booted up with the chip enabled(but will when disabled)

I need to know what a 100% compatable BIOS is so that i know when i got it working so i wont have to try something on the LPC then reflash my chip with every bios there is then when that doesnt work id try anoother thing on the lpc and go through the same thing, i think u get the picture.  Any help would help out alot.

THis is my first time on xbox-scene, i heard great things about it. I look forward to it.

Have you tried a Multi-version Xecuter2 BIOS ???

Cheers!

[BlAKnIGhtFoG]

Im pretty sure i have. I will try tomorrow before I resolder my points. TO install the wire header, i jsut melted the solder inside and slipped the wire in then let it harden. will i need to add more solder?

By the way, is that multiversion bios "100% with lifetime warranty"(u get what i mean) compatable with any 1.0 with xecuter 2.6?

Also how do you flash it? someone said that the 1.0s need 1mb bios files. is that true or is that BS? I am using the external programmer with s2 bios manager 2.3

THanks alot

[solder_blob]

Im pretty sure i have.  I will try tomorrow before I resolder my points.  TO install the wire header, i jsut melted the solder inside and slipped the wire in then let it harden. will i need to add more solder?

By the way, is that multiversion bios "100% with lifetime warranty"(u get what i mean) compatable with any 1.0 with xecuter 2.6?

Also how do you flash it? someone said that the 1.0s need 1mb bios files.  is that true or is that BS? I am using the  external programmer with s2 bios manager 2.3 

THanks alot

the TSOP on the 1.0 Do need 1MB tho your not flashing it since you have a mod chip to flash. Personally I would toss the chip out of there and just flash the TSOP with a 1MB 5032 BIOS since you only would have to bridge 2 points on the motherboard to enable writing to the TSOP Chip on the motherboard. You can flash the TSOP With a gamesave.... AUF or MA or SC. Now for the chip I have never used it but I'm sure it will ask for a flash CD once you get it installed right. Just be sure the points are soldered well.. just don't burn out anything on the board... You can make a flashCD but for now lets get the sucker working....

Cheers!

[BlAKnIGhtFoG]

is any of the multi-version BIOSs work on the x2.6ce for the xbox1.0?

im really sure my points are soldered well since every continuity check passes but will look over the board tomorrow again.
Also if i could ask, did i solder the points right with all the holes filled? i just melted the sodler nd slipped in the wires. does it need more solder on them than that?

This post has been edited by BlAKnIGhtFoG: Aug 1 2005, 11:36 AM

[solder_blob]

is any of the multi-version BIOSs work on the x2.6ce for the xbox1.0? 

Also if i could ask, did i solder the points right with all the holes filled? i just melted the sodler nd slipped in the wires. does it need more solder on them than that?

MMM i think you got em points good.... Yeah the multi-ver bioses should work on the X2 2.6ce.... I would reread the guide and make sure I installed them correctly and make sure the guide was made for a 1.0 box..

Cheers!

[BlAKnIGhtFoG]

yeah thats what i was thinkin also. ill read through all the guides 2 see if i misse somethin. this is my third xbox i modded, idk y its goin so badly.

What banks should i flash the bios 2? i heard flashing to second bank, what should i put on the first bank if its true?

[solder_blob]

yeah thats what i was thinkin also. ill read through all the guides 2 see if i misse somethin.  this is my third xbox i modded, idk y its goin so badly.

What banks should i flash the bios 2? i heard flashing to second bank, what should i put on the first bank if its true?

Any bank will do... or just go on flash all them banks... Personally I'd flash Bank 1 w/ 5032 then Bank 2 with EvoX M8plus then bank 3 with a debug bios :-)


Cheers!

[BlAKnIGhtFoG]

alright, i will try the flash on all and then try the bank 1 and bank 2 flash with different BIOSs. the x2 only has 2-512k banks

[solder_blob]

alright, i will try the flash on all  and then try the bank 1 and bank 2 flash with different BIOSs.  the x2 only has 2-512k banks

Good Luck! let us know how it goes!

Cheers!

[BlAKnIGhtFoG]

didnt owrk. im going to resolder everything and hope that works. i kinda did it differently than what the tutorial said to do it so im gonna do it the way the tutorial said to