now pull the clip from the Mobo and attach the ends of your extended cables to those that correspond by colour on the part that came from the controller port. You following?, a little point here make sure that the second black cable is kept unattached the second black cable is the one right on the end and is slightly thinker then the rest, this is a grounding cable.
find a good place to position your reciver i found that a good trick is to look for a component that has almost the same height as the tallest part of the reciver and back the reciever onto that. Make sure you dont place it over a screw hole! you can see where i placed my reciever.
Now the cable that we left unnattached, the grounding cable needs to be attached securely to a point inside the xbox that is grounded such as the metal sheeting. The Red is grounded from my first reciever and the yellow from number two. I have wrapped the cable around the sheeting and then elctric taped both sides.
Neaten the whole thing up and secure all the wires.
Re-assemble your whole case and sit Back. Enjoy falling in love all over again.