Ok, this was posted (by me) on another site after figuring it out (took me 6 hours, lmao). This tutorial is writen for the most un-knolegable people!
1: Get "dvd2xbox" version 0.5.1 or higher working. (This tutorial is writen based on 0.5.1, so if some of the options are not the same, I hope you know how to atleast get a game to the hard drive.)
2: Select the destination folder.
3: Press start if all info is correct.
4: Once the game is SUCCESFULLY copied, eject the game (if it didn't do it for you) and reset the xbox.
5: I'm running EvoX (not sure what the version is
, but I see the numbers "+3935" ). Goto "Sytem Managment">"EvoX Settings".
6: Now scrool down using the D-Pad, not joystick, untill you find "Video" in yellow, under that you should see 2 setting... "Video Standard" and "Game Region". Change "Video Standard" to "NTSC-North America" by pressing the "A" button. (This option may not be changable, as long as it fits you currunt game version.) Now change "Game Region" to "North America (NTSC)" by pressing the "A" button untill you get to that option.
7: Now scroll further down untill you see the "TSR" option located under neith the "Misc" section. Change it to read "Debug" by pressing the "A" button once again.
8: Scroll a little further down untill you see the option "Save And Exit". Select it and you sould be back at the previouse menu.
9: Tun off you XBOX, do not reset! Manually turn off you XBOX and you're set!
If you have any questions reguarding this tutorial or "dvdtoxbox" setup. You can contact me directly at: firstname.lastname@example.org
Hope this helps on the's forums too too.