xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> 1.6 Sp Adapter And Old (blue) Xenium
danania1
post Apr 3 2006, 08:16 PM
Post #1


X-S Member
*

Group: Members
Posts: 61
Joined: 14-November 03
From: East Providence, Rhode Island
Member No.: 74275
Xbox Version: v1.0
360 version: v1 (xenon)
I installed a Blue Xenium on an SP Adapter to a 1.6 XBOX and I have all LEDs on when I turn on the XBOX, yet it frags. I hooked up the 5v wire and I know that all of the wires are seated correctly and all the LEDs are on. I read somewhere that with the Blue Xenium it requires the user to short black and blue wire of D0, or something to this affect. I didn't solder it though, I am using the SP adapter, do I have to short a wire? If so, how would I go about doing this? Thanks again for all your help, it is well appreciated.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Rabid1
post Apr 3 2006, 09:57 PM
Post #2


X-S Expert
***

Group: Members
Posts: 546
Joined: 8-October 04
Member No.: 154157
If you hooked up the 5v then you may have fried your chip. Xenium does not use the alternate 5v, it uses 3v from the LPC. What is happening when you try to boot? With the S.P. you can cross the blue and black wire on the removable d0 and the original Xenium chip should work.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
danania1
post Apr 3 2006, 11:09 PM
Post #3


X-S Member
*

Group: Members
Posts: 61
Joined: 14-November 03
From: East Providence, Rhode Island
Member No.: 74275
Xbox Version: v1.0
360 version: v1 (xenon)
Thats what everyone keeps telling me but nobody tells me how. I never got a blue or black wire. I can get 2 wires but I don't know what to do with them? Where do I connect them? etc. Thanks for the help
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Rabid1
post Apr 4 2006, 01:38 AM
Post #4


X-S Expert
***

Group: Members
Posts: 546
Joined: 8-October 04
Member No.: 154157
bac k when you got your chip you should have got a small white plug with a blue and black wire soming ouy of it. That plugs into a port on the side of the chip. If not you will have to solder a wire to the d0 and then ground that wire on a screw hole.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 23rd May 2013 - 04:48 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx