Vga Controller Mod For Your Old School Controllers Options

[pimpmaul69]

ok first off i want to thank the guy who did the six button genesis controller vga mod @ xerxes3rd.net.. he beat me to a vga tut so he gets credit for that.. i will however elaborate way beyond what he did. to start i will show a tut on a genesis six button, a nes , a snes, a saturn, a sega mater system, an atari 2600 and an atari 7800 controller..

first thing you need to know is my wire color pinout:

------- BLUE -------------------- +5V

------- EXPOSED WIRE -------- GROUND

TP63 - RED -------------------- LEFT TRIGGER

TP19 - PINK ------------------- BACK

TP64 - GREY ------------------- RIGHT TRIGGER

TP18 - BROWN ---------------- START

TP13 - BROWN/WHITE ------- UP

TP15 - WHITE ----------------- DOWN

TP16 - TURQUOISE ----------- LEFT

TP17 - ORANGE --------------- RIGHT

TP69 - GREEN ----------------- BLACK

TP72 - YELLOW ---------------- WHITE

TP71 - RED/WHITE ------------ Y

TP70 - BLACK/WHITE -------- X

TP68 - PURPLE ---------------- B

TP67 - BLACK ----------------- A

take the female end of your vga cable cut it and very carefully strip it like this


now take apart your fatboy controller and remove the memory card casing and shove your vga cable in the bottom memcard slot like this



Now go to here
anduse the 2 pics to find the solder points on the fatboy controller.. he does not show the l and r triggers but you can find them really easy. remember use my wire color scheme not his.. otherwise my whole tut is a waste of your time.desolder the 5 pins off the bottom usb memcard and snap off the memcard port


now that you have the fatboy controller done it is time to do the old school controllers.
on the old controllers you may need to remove the old chip.. also removing the old wire pins is optional you can just snip them off. ok the fastest and best way to remove a chip is with a heatgun or a blow dryer..once the chip heats up enough you can easily pry it right off without damaging the solder pads

and if you choose to completely remove the old wire pins you can use a desoldering iron (my personal choice) or a desoldering braid. otherwise you can just snip the wires off


now on the rest of the tutorial all i am going to show you is the controller and its circuit board with the color wires that get soldered to each one.. light grey represents the bare ground wire.



an nes controller





a snes controller





This post has been edited by atomiX: Jun 27 2006, 03:06 AM

[pimpmaul69]

a genesis six button controller



a sega master system controller



a saturn controller




an atari 2600 controller



an atari 7800 controller



i will post more old school controllers as i do them. and if there was anyone else that i did not credit for this, i never saw your tutorial so i am sorry. i am also using photobucket so if anyone has a more permanent solution please let me know.

This post has been edited by atomiX: Jun 27 2006, 03:12 AM

[nightmare84j28]

Nice tutorial, quick and easy

[pimpmaul69]

a genesis 3 button controller




This post has been edited by atomiX: Jun 27 2006, 03:20 AM

[Zeck]

Bump and if you could do this with a smaller 6 button sega saturn controller that would be really awesome of you.

[sicknasty413]

that is good stuff. All i did was look at the pics.. lol, but awesome!

[Perplexer]

Nice work man!

[atomiX]

Very Nice.
Added to pinned guides.

[pimpmaul69]

Bump and if you could do this with a smaller 6 button sega saturn controller that would be really awesome of you.

i only have a japanese grey one that goes with my grey saturn and i wont chop it cause it completes my saturn.. but i will open it up to post a pinout


This post has been edited by pimpmaul69: May 7 2006, 06:11 AM

[pimpmaul69]

small saturn controller





This post has been edited by atomiX: Jun 27 2006, 03:21 AM

[Zeck]

Awesome thanks a lot Pimpmaul, now I can use two Saturn controllers on my Xbox. ^^

[africamagical]

thanks for the great tut,
where did you get your vga cord?
the ones i have lying around i cut up dont seem to have 14 wires,
Is it because they arent SVGA?
in any case i dont want to go out and buy a few, destroy them just to find the same problem.

[pimpmaul69]

the ones i got are 15 wires.. they are from bestbuy.. they are vga extension cables..if you have 14 wires just dont use the 5v wire... i dont use the 5v vga even though i installed it to the vga port... i have several turbo timer chip mods i made but dont have a controller that i can use them on

This post has been edited by pimpmaul69: May 12 2006, 05:28 AM

[xboxuser5]

too cool have a matching set of neo-geo stick's too?

[pimpmaul69]

im working on getting the neo geo sticks..will post in tut when i do