hello. trying this out for the first time. got 2 nes controllers working great! but a few problems with genesis and the fat boy it self:
1. do i need to remove all resistors on genesis controllers? i made a 3 button and it was all messed up but i forgot to remove the resistors in this pic by bassquake: http://img38.imageshack.us/i/megadrivepcbonlymarkedr.jpg/
(thanks a million for this btw). i went back took those off and some of my issues were solved but C is still messed up and i think A and B are the same button. see how all the resistors in that pic on the right are removed but not the left or the bottom ones? maybe he just didn't do it before this pic? the only button messed up on this 3 button controller is C. it thinks im holding down "speed up cpu" (as in makes game speed up) however that's currently mapped to right trigger and i don't have right trigger even soldered on the fat boy pcb yet. i did a 6 button and it was even more messed up. same thing, B speed things up and made neogenesis say "game loaded" ect... i didn't remove any resistors on this board. do i need to remove all on both?
2. where is tp63 on the fat boy? i looked all over it and cant see it anywhere. I'm pretty sure i found tp64 OK. there is sorta an arrow to what i think it is.
3. last i have a genesis controller that is different than both bassquakes and pimpmaul69's and need to know the tp points or at least how to figure out my self what tp points i need to solder what to. here's a pic of the pcb:
its similar to bassquakes. but different.
p.s. i live in the states and found that same 3 button genesis pcb in a controller as bassquake's "pal MD 3 button". it has a grey start button and says sega genesis on it. guess they used it here too.This post has been edited by dballs442: Feb 17 2011, 12:17 AM