XCM 360 Chromed Controller Installation Instructions Options

[Xbox-Scene]

XCM 360 Chromed Controller Installation Instructions Posted by XanTium | August 27 12:13 EST

Team Xtender released the installation instructions for the XCM 360 Chromed Wired Controller Shells and XCM 360 Chromed Wireless Controller Shells [QUOTE] * XCM 360 Chromed Controller (wireless) installation instructions XBOX 360 wireless controller disassembly 1 - Open the Xbox 360 wireless battery. Use the screw driver that is included to take off the 7 screws. 2 - Seperate the two sections of controller. 3 - Unscrew the 2 screws as indicated in the diagram. 4 - As indicated in the diagram, use the screw driver to apply pressure to the area indicated. 5 - Remove the parts as displayed in the diagram. 6 - As Indicated, follow the step by step instructions to remove the Xbox 360 RT and LT buttons. 7 - RT and LT buttons that are already disassembled. XCM360 Chromed wireless controller installation. 8 - RT and LT buttons as to be installed. 9 - Install RT and LT buttons separately. 10 - Install the directional keys onto the XCM chromed controller case and install the screws as indicated. 11 - Solder the LED wire to the location as indicated. 12 - Fit the PCB as snugly to the case as possible. 13 - Put on the XCM chrome controller bottom piece. Install the 7 screws. Finally, install the battery. 14 - Installation Completed! 15 - The on off button will turn on or off the LED inside the XCM 360 chromed wireless controller case. * XCM 360 Chromed Controller (wired) installation instructions XBOX 360 wired controller disassembly 1 - Use the screw driver included in the kit to unscrew all 7 screws. 2 - As shown in the diagram, disassemble the Xbox 360's controller. 3 - Unscrew the 2 screws as seen in the diagram. 4 - As shown in the diagram, put the screw driver in the location as indicated. 5 - Disassemble parts as indicated. 6 - As shown, disassemble the XBOX 360 RT and LT button separately. 7 - RT button and LT button as shown. XCM 360 Chromed Controller Case Installation (For wired Controller) 8 - Prepare to install RT and LT buttons. 9 - As indicated in the diagram, please follow the instructions to install RT and LT buttons. 10 - Put the directional keys in the controller case. Install the screws and plastics. 11 - Solder the LED wires onto the locations as indicated. 12 - Put the XCM chromed controller case on and install the 7 screws as shown. 13 - Installation complete! 14 - The Light switch as shown can be used to turn the LEDs on and off. [/QUOTE] Official Site: http://www.teamxtender.com Buy XCM Chrome Wireless Shells ($27): Blue | Green | Red | Yellow Buy XCM Chrome Wired Shells ($25): Blue | Green | Red