first of all, I will give you big Kudos for creating such a comfortable Tool, awsome work man!
Here is my point..
My Msinfo32.exe is not working anymore (dont ask why, there are many reasons / I tried many ways to fix that problem, only way left is a WindowsXP repair Installation)
, so the Tool get me a error Message that it is unable to generate MSinfo32.exe, etc.So
I manually searched for the needed HexNumbers.
I found them on my Systemmanager/Hardwaremanager -> show Typ of resouces -> I/O -> VIA SATA Raid -> 7byte difference(I/O Port)"BC00 C400"And
doubleclick -> Details, there is the PNP...( Device ID) "1106 3149"Now
I add them manually by cheking the "Use Coustom MTK Flash", choosed "VIA SATA RAID Controller" and cliked on the "Prepare Drive Button". Afterwards
I HexEdited the MTKflash.exe, went to Line b3d and got that "0611 4931 f001 7001
I wanted to check it for myself. So I tried the way it is explained over here http://www.360mods.net/tutorial/Samsungv41.pdf
"1106 3149" "BC00 C400"
"0611 4931" "00BC 00C4
the underlined Part is not the same as I would do it totaly manual.
I am a little bit confused right now...
so my Questions are,
1) Maybe you can integrade another (second/additional) way to grab the needed Information from MSInfo32.exe for the "Detect ID/IO".
2) Maybe you can integrade a RESULT message about chosen the right Chipset and about entering the correct HexEdit which can be considered for the Typ of Chipset.
Or simply something like a "YOU HAVE DONE ALL WELL" Button
Sorry for writing such a bad english, it is not my native language.
Thank you very much so far,