|
Well my 360 has been flashed for a while now, but when I initially flashed it, I used 5.2A. However games would read EXTREMELY poorly. Very long boot times (30-60+ seconds to boot), disc read errors were very common, the drive would also get very loud like it normally does reading an XBOX 360 game for a couple of seconds, but then it would get very quiet again (as if it went from reading at full speed to 2-4x). It would also make clicking noises all the time. It got to the point when it wouldn't even load games about 2 out of 3 tries. Then after waiting a very long time for the game to boot, it would load very slow or freeze almost immediately.
I then tried using a firmware that would read the games at a slow speed (2-4x). The games boot fine, just like original 360 games, but load times are pretty slow, and Oblivion is almost unplayable (VERY LONG LOAD TIMES! And yes I have cleared my Cache via holding A button time on game boot up many times). Oblivion will also freeze commonly with the slow read. The disc is fine and has no scratches at all.
In any firmware, including those with mutli speeds (i.e boot originial to change speed), it reads for shit with fast, and fine with slow. I used a VIA 6421L PCI SATA card (I think that is the name, w/e it is, I bought the one recommended on this forum), all four variations of XTreme's 5.2 firmware. My games are all on Verbatim DVD+DL (all games burned at 2.4x speed), I backed up with a Tosh-Sam SH-D162C with Kreon v0.81. I have used XBC (latest version) to back up and burn AND Schtrom Xtract/IMGBurn for my back ups.
Does anyone know what the problem is with my 360? I have reflashed my drive countless times. And I have tried several different methods for burning games. All with no avail. I have also flashed my friends MS28 the exact same way as mine and all of my back ups work on his perfectly at fast speed (12x) on 5.2A, C, and D.
I would appreciate any help anyone can provide. If I forgot any information that would be useful please ask.
|