Compatible Motherboard/pci Card, Plse keep all such questions in this thread Options

[sosotiit]

Plse ask here all the
Can this motherboard/Pci card be used to flash my X360 Drive?

and provide the full info
-X360 Drive Brand and Model: xxxx (i.e. Hitachi V47)
-Motherboard/PCIcard Model: xxxx (i.e. asus p4c800)
-Chipset on Motherboard/PCIcard Model:xxxx (intel)
-Slax version: (i.e. v2.1)
-Other relevant info...


rgds, soso

This post has been edited by sosotiit: Mar 23 2007, 01:04 AM

[DestinedAcorn]

Works.
-X360 Drive Brand and Model: Hitachi 47DH
-Motherboard/PCIcard Model: Rosewill RC-205 (PCI Card) Driver 1.3.67 from Windows Update (not listed on Rosewill Site)
-Chipset on Motherboard/PCIcard Model: Sil 3512

[Victory_Fan]

Ok im still having problems with my Via sata card. Tried reflashing my DVD drive with a usb and xtreme boot maker. It goes too look for the drive, but finds nothing... Im soooo frustrated sad.gif Btw, does it matter what Slot my Sata card is in?atm, Location: PCI Slot 5 (PCI bus 2, device 0, function 0)


So i am wondering will this work

http://cgi.ebay.com.au/USB-2-0-to-SATA-Con...1QQcmdZViewItem

Thanx.

[sosotiit]

Yes, definitely try changing the pci slot ( you will need to redo XBM for the new port info) and use the SATA socket toward the front of the PC,
I am assuming you tried both XBM 3.6 and 5.3 , a new sata cable,
also tried starting boot the PC to dos and X360 and then connecting the sata cable (so after the pc is in dos but before typing the command), tried another PC.

Cannot see the link to that other card.


rgds, soso

This post has been edited by sosotiit: Mar 24 2007, 02:44 PM

[Meanee]

360 Drive: Samsung MS28
Motherboard: EVGA nforce 680i
SATA controller: nForce 590 (detected by Windows)

Anyone had experience with this combination? Edited mtkflash gets stuck after I select my port. I tried to turn 360 off and on, same thing

[sosotiit]

@Meanee

Not good, MS28 requires Via chipset!!

either you have it on your PC or you need to by a SATA PCI card with VIA6421 chipset on it.

rgds, soso

[Meanee]

@Meanee

Not good, MS28 requires Via chipset!!

either you have it on your PC or you need to by a SATA PCI card with VIA6421 chipset on it.

rgds, soso

Thanks, guess it's gonna wait till tomorrow. I flashed MS28 at friend's house who has some VIA variation in his motherboard...

[palmmann]

anyone know if the hitachi gdr-3120L is compatibile with either
http://www.asus.com/products4.aspx?l1=3&am...amp;modelmenu=1
or
http://www.newegg.com/Product/Product.asp?...N82E16813131035

onboard sata i mean. i know i'll have to use slax 2.1 to get it into debug mode but will it still work?

[alexnestian]

Can this motherboard/Pci card be used to flash my X360 Drive?

and provide the full info
-X360 Drive Brand and Model: Hitachi-LG ( i do not know the model cause i didn't opened the case yet )
-Motherboard/PCIcard Model: Asus P5N32-SLI SE Deluxe
-Chipset on Motherboard/PCIcard Model: nForce 4
-Slax version: 2.0

thanks a lot guys

[loki232323]

Wanted to see if my onboard sata connections would work on any drives. Also wanted to see if I need to set anything when using the VIA card. I do not use raid on my pc so it is disabled already, but I wasnt sure if the via card had raid settings that needed to be disabled.

I tried slax 2.1 with my hitachi 59dj but couldnt get into mode b for some reason, so I got the connectivity kit and will try that once it arrives (hopefully tonight)

Mainly asking a few question to prepare myself for future flashings

-X360 Drive Brand and Model: Hitachi-LG 59DJ but I also have a few samsungs my friends want done

-Motherboard/PCIcard Model: Asus p5b deluxe
-Chipset on Motherboard/PCIcard Model: P965 and I have the VIA pci card from newegg that everyone was recommending
-Slax version: 2.0 or 2.1

[loki232323]

bump

[Havok]

The PCI Via card will work good for all drives. Your motherboard chipset does not matter in this case.

[Redwings99]

-X360 Drive Brand and Model: TS H943: F/W - MS25
-Motherboard/PCIcard Model: VANTEC eSATA 2-Port SATA Cardbus Adapter
-Chipset on Motherboard/PCIcard Model: (Do not know)

Going to use Xtreme Bootmaker v0.3.6, Xtreme F/W 5.2

Basically I would like to know if this PCMIA SATA Card will work with my laptop to flash my drive.

http://www.memoryexpress.com/index.php?Pag...D=9621&SID=

[sosotiit]

There are no known PCMCIA card to flash SAMSUNG. No luck from a laptop at this point,
sorry

rgds, soso

[lonelycooler]

Not quite sure on the drive yet as i have been unable to open atm. i know i cant bad flash with the MS28 on this chipset but will it work for the ms25?

Name NVIDIA nForce4 Parallel ATA Controller
Manufacturer NVIDIA Corporation
Status OK
PNP Device ID PCI\VEN_10DE&DEV_0053&SUBSYS_0CA4105B&REV_F2\3&2411E6FE&0&30
I/O Port 0x0000E000-0x0000E00F
I/O Port 0x000001F0-0x000001F7
I/O Port 0x000003F6-0x000003F6
IRQ Channel IRQ 14
I/O Port 0x00000170-0x00000177
I/O Port 0x00000376-0x00000376
IRQ Channel IRQ 15
Driver e:\windows\system32\drivers\nvatabus.sys (5.10.2600.0479 built by: WinDDK, 85.88 KB (87,936 bytes), 11/04/2007 21:33)

Name NVIDIA nForce4 ADMA Controller
Manufacturer NVIDIA Corporation
Status OK
PNP Device ID PCI\VEN_10DE&DEV_0054&SUBSYS_0CA4105B&REV_F3\3&2411E6FE&0&38
I/O Port 0x000009F0-0x000009F7
I/O Port 0x00000BF0-0x00000BF3
I/O Port 0x00000970-0x00000977
I/O Port 0x00000B70-0x00000B73
I/O Port 0x0000CC00-0x0000CC0F
Memory Address 0xDFFFB000-0xDFFFBFFF
IRQ Channel IRQ 23
Driver e:\windows\system32\drivers\nvatabus.sys (5.10.2600.0479 built by: WinDDK, 85.88 KB (87,936 bytes), 11/04/2007 21:33)

Name NVIDIA nForce4 ADMA Controller
Manufacturer NVIDIA Corporation
Status OK
PNP Device ID PCI\VEN_10DE&DEV_0055&SUBSYS_0CA4105B&REV_F3\3&2411E6FE&0&40
I/O Port 0x000009E0-0x000009E7
I/O Port 0x00000BE0-0x00000BE3
I/O Port 0x00000960-0x00000967
I/O Port 0x00000B60-0x00000B63
I/O Port 0x0000B800-0x0000B80F
Memory Address 0xDFFFA000-0xDFFFAFFF
IRQ Channel IRQ 20
Driver e:\windows\system32\drivers\nvatabus.sys (5.10.2600.0479 built by: WinDDK, 85.88 KB (87,936 bytes), 11/04/2007 21:33)


Nevermind I Just Bought a VIA

This post has been edited by lonelycooler: Apr 16 2007, 02:50 PM