Talismoon ElectroTwister Blue/Green Lightning Kit Options

[Xbox-Scene]

Talismoon ElectroTwister Blue/Green Lightning Kit Posted by XanTium | May 3 12:15 EST | News Category: Xbox360

Talismoon released a new casemod product: [QUOTE] Now you too can "bend light". The Electrotwister provides safe, cool, flexible accent lighting for any Xbox 360 mod installation. Safely route the light around corners to trace major components, or use as an underglow or other indirect lighting. The Electrotwister is cool to the touch and can fit almost anywhere! The electrotwister is the most versatile lighting mod on the market today. It is a wire whose insulation glows brightly when powered by low voltage current. It requires no soldering, it is extremely easy to install. Can be used for highlighting details, or indirect lighting. It is recommended that you cover the cable with heatshrink or electrical tape in places that you don't need to see it glowing. A perfect mod for people who feel that typical case mods are limiting or too standardized. Important Information: 1) No soldering is required, just open your xbox 360 and plug in the electrotwister. 2) Cover parts of the wire that you do not want people to see glowing with electrical tape or heat shrink tubing 3) You can cut the electrtwister with scissors, but terminate the cut end properly you can cover teh cut end with electrical tape) 4) Fix the Electrotwister into place with non-conductive tape or a drop of epoxy super gluw is NOT recommended) [/QUOTE] Buy Now ($10): ElectroTwister Blue | ElectroTwister Green Official Site: www.talismoon.eu

[GeToChKn]

It's called EL wire and probably been around for at least 10 years. lol.

[Shadow Beast 01]

Yea, That^^^ and the fact that I really don't see it being better than an LED. Plus there is really not that much use for it in the 360 I don't think. I mean I guess you could outline traces on the motherboard, that might look kind of cool, or go around components with it, but in the end I don't think any of the that would look very good.

[Ravo5002]

i had this in my original xbox... in the le crystal case. looked kinda cool

[belke]

it would be kind of cool for someone to integrate this into a design in the bottom of their case and make a nice underglow effect.

[Diekund]

Congratualations yoow wonn tha prise for tha bets engwish out thare

not very useful i wouldnt have said. Although it is quite cheap

[eatshitanddie]

Very cheap, think, you can use it for more than your xbox....

[Steve-0]

this stuff is ok for VERY ambient lighting but doesnt even come close to led's even if you traced the parts on a motherboard the effect would be as dazzling as pouring vinegar in your eyes.

[Shadow Beast 01]

this stuff is ok for VERY ambient lighting but doesnt even come close to led's even if you traced the parts on a motherboard the effect would be as dazzling as pouring vinegar in your eyes.

Not to mention when its all said and done only 1/4 of the motherboard is even visible, and thats if you havn't added a third fan, which seems to be a growing trend.

This post has been edited by Shadow Beast 01: May 3 2007, 07:42 PM

[Ryansc]

Very cheap, think, you can use it for more than your xbox....

Use it for more than your xbox? but the whole point for buying this crap is to put it in the 360.

Nobody likes this shit.. looks like ass wraped in stupid elecrtic wire.

I actualy feel insulted that Talismoon thinks we want this crap.. If i want light i will do my own. Im not a noobin

This post has been edited by Ryansc: May 3 2007, 08:35 PM

[proger]

The used the 'words' "teh" and "gluw"... wtf? That alone is enough for me not to want it.

[Heet]

I dont do EL wire. Yuck.

[DMAddict]

I dont do EL wire. Yuck.

I would do you sig Heet, Yum.

[xDOxWORKx]

I would do you sig Heet, Yum.

took my words, i was gonna post that then i read your post lmfao, but i had el wire in my pc and tbh it looks really bad unless you can make like a picture out of it

[TehBanStick]

Oh boy, another talismoon product with a fan leecher...