xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> 360 Overheating
fatc2k3
post May 13 2007, 10:16 AM
Post #1


X-S Member
*

Group: Members
Posts: 113
Joined: 10-January 06
Member No.: 267821
I had the 3RLOD problem on my 360, after reading about the x clamp replacement i decided to give it a shot. Followed RBJ`s tut but struggled to get three washers on so left it at two, let it overheat then let everything cool down before putting everything back together. Fired it up no 3 lights after 30 seconds but 2 lights (overheating). So took it all apart again and took it down to one washer .....same problem. I noticed however that the thermal paste i put on has dried up.....anyone able to give me some guidance on what to try next? As i say 360 fires up fine stays on for about 30 seconds ...fans get louder and then console shuts off flashing 2 red lights.

Any help would be grately appreciated.

TIA.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
sinister slipknot
post May 13 2007, 01:56 PM
Post #2


X-S Freak
*****

Group: Members
Posts: 1461
Joined: 17-September 04
From: Albion
Member No.: 148059
Xbox Version: v1.4
360 version: v4.0 (jasper)
Reapply the paste, and put three washers on, how are you stuggling to put three on, whats the problem? You shouldn't overheat your system to get rid of the 3LOD, if you need to do that then your problem will more than likely come back.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
fatc2k3
post May 13 2007, 07:02 PM
Post #3


X-S Member
*

Group: Members
Posts: 113
Joined: 10-January 06
Member No.: 267821
Thanks for your response.

Struggling to put three washers on as there is no room for the nut on topof the heatsink.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 19th June 2013 - 10:00 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx