3rlod Again Plz Read Not Sure Wht To Put For Title Options

[wellmodded]

HEy i fixed a 0110 error for my friend using the xclamps replacements method mk1
i used mk1 caue i had mroe sucess with that method than all the other method and i have fixedabout 10 xbox360 so far
this is what happening i fixed the xbox360 usign mk1 fix and i didn't play on it log by me whn i carried if over by him and we poped in halo2 it started to show square on the screen the eventualy showed nothink on the screen but thr system still booted

so i carried it back by me and i adjusted the pressure on the gpu die and eventually found a good setting so it won;t dio that thn i ha the xbox by me for like a week and i play on it everyday for about 4hours or so and it nver froze or nothink i play halo2, and dirt mostly

dirt very graphical game so i now the system was running hot temperature any waz

i carried it back to my friend and play halo2 fo like 7 hours on it straight and thn the next day he called me and told me it turning on and eveyrthink just not showing any think on the screen

i remmber last eyar i fixed some 1 system and that had a problem like this and used a hot air gun and it worked for like 2-3months and thn i did xclamps replacement

just wondering is it wise to try and heatgun the mbo slightly or just don';t worry about tht

i was thinking probley the bolts are comeing slack or somethink but i higly dought tht casue i thinki crazyed close thm to the metal case so thy can't turn

[hendrix219]

I really couldn't read your typing, but from reading lawdogs tutorial for the x clamp, I recommend removing the fans and letting it overheat so the solder joints fall back in place.

[TheGOAT99]

Personally I would not want to over heat my xbox.

You could try a shim as described in RBJTECH's x-clamp replacement.

Have you done some mods to improve the cooling? If you’re playing it for 7 hours straight I would recommend that you do.