Perfect Install of SmartxxV3, Using a Spider, 1.6 box
I turn it on and it just FRAGS, Checked all of the pins and they're in correctly
Removed and replaced them all like 6 or 7 times, So Finally, I removed the Chip
Leaving the spider in and it boots like a regular xbox, working just fine
and the blue led on the spider is on so it's still connected
Now, for my question... I broked of the D0 on the chip, originally it was going into a 1.0 box.
And decided against that and it has never been used, So do I need to solder the D0 point to the board?
I'm not going to use the LPC rebuild because if the chip is bad then It was a giant waste of time.
but if the D0 point needs to be soldered in thats fine, but I dont want to do it unless I have to because
Solder looks ugly :/