iPrep 101 v006 Options

[Xbox-Scene]

iPrep 101 v006 Posted by XanTium | November 21 23:56 EST | News Category: Xbox360

Klutsh released a new version of iPrep 101(info) a .NET application and collection of MSDOS scripts/applications for use in flashing a Samsung TS-H943A or BenQ DVD drives. What's new/fixed: * Added Drive restore scripts. (see How to Use) * Fixed GUI text error. * Fixed BenQ batch files (again). * Reverted to DosFlash(info) 1.3 Official Site: x-projects.org Download: here

[RiPpN-N-TrIppN]

"* Added Drive restore scripts."
hehe funny

[comhen]

Reverted to DosFlash 1.3

WHY?

[Klutsh]

"* Added Drive restore scripts."
hehe funny

Was actually done and released before MS started the banning, lol

WHY?

Cause people were reporting error's when using DosFlash 1.4

[comhen]

Cause people were reporting error's when using DosFlash 1.4.

So dose this mean if I use dosflash 1.4 I will get error too or just in conjunction with iPrep?

[Cilix]

I did my first BenQ drive yesterday wit iPrep 101 v005 and worked perfectly but I will update.

[aziz3786]

My samsung Xbox 360 got replaced by microsoft with the benq drive after three red lights, was fine flashing the sammy drive, is there a step by step guide doing the benq drive?

[deilzfcjk]

Is this the version that will not caused errors? dosflash 1.4? Is that the one in iprep101v005? I want toknow because I 'm using that one
right now(v005). I just want to make sure everything is alright. Also, when I read the tutorial by caster on how to flash the benq va6038 it says to copy the dosflash program over to the usb stick? I don't use a usb stick but NTFS4DOS. So, when Iprep made my directories, it placed the dosflash prog in /iprep101/tools/dosflash.exe.
Should i move it back out into the iprep 101 directory?

[tezza192]

Just used to flash my first BenQ worked Perfectly

[DMAddict]

I have a Benq VAD6038. The question I have is when and for what reason would I check the box to 'Patch MTKFlash' in iPrep?

[Indiana999]

Folks, I'm having trouble:

...
Turn ON the drive, wait for the status to change to D1 - CHECK
Turn OFF the drive for 2 seconds - CHECK
Turn ON the drive, reading should start - CHECK

But, the status alternates between 0xD1 and 0x51 for a long time. Is this normal and if so, how long should it take.

I've tried three different computers now and the exact same results on each.

[DMAddict]

Folks, I'm having trouble:

...
Turn ON the drive, wait for the status to change to D1 - CHECK
Turn OFF the drive for 2 seconds - CHECK
Turn ON the drive, reading should start - CHECK

But, the status alternates between 0xD1 and 0x51 for a long time. Is this normal and if so, how long should it take.

I've tried three different computers now and the exact same results on each.

Just keep turning the 360 off and on until it detects it. You may be leaving it off too long.

[Rizzor]

Thanks for this great tool. It makes flashing easy.

I also got the switching between 0xD1 and 0x51. Guess it's normal, because I turned the BENQ drive off and on and it starts reading, erasing or flashing immediately. Backups and original disks are working fine.

[connorno1]

feck i just tried this and it dben part worked ok made trhe backup but when it came to flashing it just froze on bank 0 ok..shit please advise im getting error 65 now

as follows
erasing ok
erasing finished
pl;ease turn your benq drive off now
press any key to continue

(i turn my 360 ff)

following steps you need todo
press yes to resend mtk
turn on drive flashing should start


i dont actually get asked for the above mtk yes to start flashing but as soon as i turn of after erase ok it seems to flash when ok get bank 0 ok then stops?

how do i restore original fw to start again?

This post has been edited by connorno1: Nov 24 2007, 02:18 PM

[hobogoonie]

feck i just tried this and it dben part worked ok made trhe backup but when it came to flashing it just froze on bank 0 ok..shit please advise im getting error 65 now

as follows
erasing ok
erasing finished
pl;ease turn your benq drive off now
press any key to continue

(i turn my 360 ff)

following steps you need todo
press yes to resend mtk
turn on drive flashing should start
i dont actually get asked for the above mtk yes to start flashing but as soon as i turn of after erase ok it seems to flash when ok get bank 0 ok then stops?

how do i restore original fw to start again?

This sounds exactly the same as what happened to me the other day. Dont panic. As long as you have your original dump. Keep that safe. It will work. You dont need to restore, just erase again. I think what I did is when it tells you to turn it off, do that. But just before the bit where it doesnt give you chance to hit yes, turn it back on, then proceed and it should flash. It worked for me. I will go into greater detail later, not at home at the moment.